High Strength Hydraulic Plate Rolling Machine With Maxi Roll Plate Thickness 10mm

Hydraulic Plate Rolling Machine With Maximum Roll Plate Thickness 10mm

Ⅰ.Technical parameters of Hydraulic Three-Roll Symmetrical Plate Rolling Machine of Metallurgy Machine

Ⅱ.Matters needing attention of Hydraulic Three-Roll Symmetrical Plate Rolling Machine of Metallurgy Machine

1. It is strictly prohibited to use hydraulic oil.

2. Overload is strictly prohibited.

3. It is strictly prohibited to run after overlapping of two plate heads (in the case that the height of the upper roll is not adjusted), which is easy to damage the gear and roll.

4. Be careful not to let foreign matter fall into the gear and oil filling port.

5. No feet or hands shall be placed on the rotating workpiece or roll during the rolling operation. No one shall be allowed on both sides of the rolling machine to prevent foreign bodies from escaping and accidents.

6. There must be leakage protection device.

7. When lifting the upper roll, it is necessary to keep a certain distance between the upper roll and the upper limit screw.

8. The oil drum is filled with butter, and then add enough oil in the gearbox, do not disassemble casually.

9. The direction of the motor must be rotated according to the direction indicated.

10. The oil pump motor is prohibited to reverse.

Ⅲ.Fault and the solution of Hydraulic Three-Roll Symmetrical Plate Rolling Machine of Metallurgy Machine