Hoist Wheel Wire Guide Castings And Forgings Rope Pulley Head Sheave

Hoist Wheel Wire Guide Rope Pulley Head Sheave Castings And Forgings

1. Product description of head sheavel castings and forgings

On the premise that the guide wheel device can be transported as a whole, the traveling wheel and the fixed wheel adopt the whole casting welding structure. The wheel hub and rim are cast steel materials, and the spokes are channel steel. After welding, the whole annealing process can be carried out.

In consideration of the convenience of replacing the bearing bush for maintenance, there is room for replacing the bearing bush for disassembly, and the guide wheel device adopts eccentric arrangement.

The guide wheel shaft is integral forged of medium carbon alloy steel, with cast-welded roof wheel, equipped with PVC or nylon liner to protect the wire rope. Imported (or domestic) spherical roller bearings, bearing temperature measuring elements can also be installed.

2. Product features of Head sheaves castings and forgings

In order to prolong the service life of the wire rope, the wheel rim is equipped with wear-resistant and pressure-resistant wedge liner, using D660 (or nylon 1010) liner.

(1) Eccentric arrangement: there is a disassembly and assembly space for replacing the bearing bush on one side of the swimming wheel, and only the maintenance and replacement of the bearing bush can be carried out without disassembling the whole sheet-wheel device.

(2) symmetrical arrangement: the four wheels are symmetrical relative to the two sides of the bearing seat, but the need to replace the bearing bush, can only be removed from the whole sheaf device.

3. Product parameters of sheet-wheel castings and forgings