60-100 T/H Mineral Dressing Equipment Vibrating Screen machine

Vibrating Screen ZSM Series Vibrating Screen Of Ore Dressing Equipment

1. ZSM series vibrating screen of ore dressing equipment product description:

USES:

This series is suitable for coal, metallurgy, mineral processing, electric power, light industry, sugar making, dewatering, mediating, desliming and classification of dry and wet materials, with the advantages of large processing capacity and high screening efficiency.

2. ZSM series vibrating screen of ore dressing equipment working principle:

(1) Sieve working principle:

Under the action of agitation force, the material on the screen surface for continuous oblique throwing movement. The material is loose when thrown up, in the collision of screen surface encounter, so that is equal to or less than the screen hole de particles through the screen, so as to achieve dehydration, support or grading.

(2) Self-synchronization principle:

B - type sieve vibrator is free of forced contact, no gear between the two shafts. In order to ensure the vibration of the screen according to the straight track, the two axes must be strictly synchronized with the opposite operation, which can be done naturally in the vibration system of the biaxial screen.

(3) Working principle of damper:

The damping vibrator is arranged as shown, in working and stopping state. The rubber block does not contact the base hole. It exerts symmetrical pressure on the screen box to keep it in a stable position to eliminate cross vibration and twist.

When the stop resonance beat, the screen box amplitude is greater than the rubber block and the base hole gap, at this time the vibration needs to overcome the dynamic friction between rubber and screen box. Because frictional damping consumes some kinetic energy, the resonance amplitude is limited to three times the operating amplitude. The damping force is adjusted by adjusting screws.

3. Product parameters of ore dressing equipment

ZSM series vibrating screen technical performance:

4. Instructions for Ordering:

Name, specification, model, form of sieve plate and size of sieve hole must be indicated when ordering. When forced synchronization is used, the motor can be installed in two ways: left or right, please indicate when ordering.