Fully Automatic High Speed Fully Automatic Facial Tissue Single Channel Log Saw Cutting Machine

Description of this Fully Automatic Facial Tissue Single Channel Log Saw Cutting Machine​ 200 Cut Per Minute:

This ACE-FLS Fully Automatic High Speed Facial Tissue Single Channel Log Saw Cutting Machine is for cutting facial tissue paper, interfold hand paper towels, Z fold paper towels and also coreless toilet rolls. It can accommodate big ranges of cutting sizes. The height of log can be 140mm 150mm etc. It adopts 3 servo motors to control the cutting length and infeed to ensure the cutting accuracy.

Quick details:

1 For cutting facial tissue paper and hand towels

2 High speed 200 cut/min

3 Single lane

4 Servo motor control

5 Big ranges of cutting sizes

Mode technical details of ACE-FLS Fully Automatic Facial Tissue Single Channel Log Saw Cutting Machine.

Main structure: single channel.

Applicable material: facial tissues

Designed speed: 150 cut/min

Working speed: 80-140 cut/min

when cutting length 100mm, about 140 cut/min;

when cutting length 230mm, about 120 cut/min.

Infeed channel: With 1 piece of infeed conveyor 3 meters length.

Cutting delivery system: Independent servo control and driving.

Cutting sizes ranges: L 60-300mm adjustable

W 60-110mm

H 25-120mm

Cutting tolerance length: ±1mm

Cutting tolerance vertical: ±1.5mm

Output delivery: During the whole log saw cutting process, the tissues are pressed by Top timing belts + bottom timing belts to prevent the belts getting slippery and guarantee every cut accurate cutting. (But other company machines use flat belts which would definitely get slippery and no-accurate cutting.)

Adopt 2 servo motors to control the timing belts before the circular blade cutting and after the circular blade cutting .(But other companies’ machines use only one servo motor or NO servo motor, controlled by only inverter, which cannot guarantee accurate cutting.)

Circular blade outer diameter: 610mm

Blade grinding/sharpening system: Automatically and pneumatically grinding/sharpening, grinding/sharpening time and interval parameters can be set in the touch screen. For example, you can set it to sharpen for 1 seconds every 30 minutes or every 50 cuts.

Cutting system: 360° rotating cutting. (Not like other companies machines, the cutting system is only up-and-down cutting.)

Trim removal system: Automatically blew away by air. Trimmed size: 20-65mm.

Control system:

PLC programmed control,

Inverter for variable frequency speed control,

Touch screen for operation

Servo driving: adopt 2 servo motors to control the timing belts before the circular blade cutting and after the circular blade cutting .(But other companies’ machines use only one servo motor or NO servo motor, controlled by only inverter, which cannot guarantee accurate cutting.)

Air compressor: 4-8kg/cm2pa, supplied by customer.

Installed Power: 3phase 208v 60hz. total about 6.4kw

Servo system power: about 2 kw

Rotate motor power: about 2.2kw

Blade motor power: about 2.2kw

Machine weight: about 2T.

Machine dimension: about 5x1.9x1.95m LxWxH. Floor plan refer to below.

Technical parameters of this Fully Automatic Facial Tissue Single Channel Log Saw Cutting Machine.

Brands of components used on this Fully Automatic Facial Tissue Single Channel Log Saw Cutting Machine.