Fully Automatic Facial Tissue Paper Making Machine With Logsaw Machine

Application
This ACE-V200-15L 10 Lanes High Speed Fully Automatic Facial Tissue Paper Making Machine With Logsaw Machine In China is with both full embossing unit and edge embossing unit. It is mainly used to automatically fold, emboss, cut and count facial tissue papers, soft drawing nylon pack facial tissue paper, box-drawing facial tissue papers, pop up tissue paper napkin, interleaved tissue paper, interfolded paper towel, V fold hand towels, nonwoven airlaid tissue, and MG paper napkins etc. all-in-one machine It adopts vacuum folding style. The mainly function of this machine is to manufacture commercial tissue paper products and away-from-home tissue paper products, easy-to-take one by one plain, embossed and LOGO printed and laminated interfolded dispenser napkins and V fold hand paper towels. It has 10 lanes output and can run at very high speed up to 1000 sheets per minute per lane. The jumbo roll width can be up to 2100mm. It has 4 unwinder jumbo roll stands which are driven by separate independent reduction motor, not chain and belt. It is an ideal equipment to manufacture high grade away-from-home customized embossed facial tissue paper napkin products.
 
Advantage:

1 Machine for box facial tissue and v fold paper towel

2 With both full embossing and edge embossing.

3 high speed up to 1000 sheet/min/lane

4 Energy-saving.

5 Vacuum fold

6 Use vacuum pump

Quick details:

1 Cylinder cutoff size: 200mm/230mm/190mm etc.

2 Steel to rubber Embossing

3 10lines

4 Interfolded and V fold

5 Soft wrap tissue with soft nylon bags and duplex box.

Technical parameters as below

F. Laminating unit

a. With 2 sets of lamination units.

b. The whole design is copied Italy design.

c. Heavy chrome coating roll

d. Micro-adjustment of nips between the steel roll

e. Anilox roll for glue applicant.

f. Controlled by cylinders

g. Each lamination unit controlled by an independent reducer. When the machine stops, the motor will start running to rotate the anilox roll to prevent it getting dry.

G. Printing Section (advanced design.)

1. With 2 colors flexo-graphic printer section.

2. Printing unit with driven by timing belts to make printing more precise.

3. Simple and easy adjustment of horizontal and longitudinal registration by turning hand wheel.

4. With automatic printing roller disconnection device during machine stop. If the machine stops, the roller will automatically disconnect with the printing unit, controlled by pneumatic system.

5. The printing plate roller can be adjustable or disassembled from the printing unit, much easier for the operator to attach the printing rubber plates or clean the roller.

6. Both sides of Anilox roll & Rubber roll with buffer for anti-spill cover to stop the ink spilling out of the ink tank and spraying somewhere.

7. The printer is equipped with cover on the in tank to prevent the inks spilling out of the ink tanks.

F. Laminating unit

a. With 2 sets of lamination units.

b. The whole design is copied Italy design.

c. Heavy chrome coating roll

d. Micro-adjustment of nips between the steel roll

e. Anilox roll for glue applicant.

f. Controlled by cylinders

g. Each lamination unit controlled by an independent reducer. When the machine stops, the motor will start running to rotate the anilox roll to prevent it getting dry.

H. Control system

a. Speed: about 1000 piece/min/lane x 2 lanes. Depends on paper quality, workers etc.

b. Speed of production is controllable.

c. Main motor control by inverter

d. Automatic left-right stagger counting system, each stack of 100 pieces, 150pieces etc.

e. Machine will automatically stop if paper break or paper jams.

f. Power: about 5.5KW for main motor 3-phase AC380V 50HZ or customized.

g. With Taiwan vacuum pump, about 11KW. (Taiwan brand)

h. Vacuum pump for adsorption (included in quotation.)

i. Air pressure: 0.5Mpa(buyer supplied)

j. Machine weight: 4500kg.

k. Machine size: about 10000x1000x2100mm.

l. Important parts:

Taiwan DELTA or Germany Siemens PLC + touch screen + inverter.

Japan Omron sensors.

France Schneider electronics like contactors, relay and breakers.

The best China bearings. (Even Japan NSK or Sweden SKF bearings for the main rollers.).

Taiwan Airtac cylinders and air switch.

Taiwan vacuum pump, less noise and power.

Jiangsheng brand motors made in China.

FAQ

Q: Are you trading company or manufacturer

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 60-90 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

Finished products by this High Speed Fully Automatic Facial Tissue Paper Making Machine With Logsaw Machine In China: