VFD Control Panel 900RPM Vertical Cuttings Dryer

Vertical cuttings dryer can help users to manage the oil base mud waste

Description of vertical cutting dryer

Vertical cuttings dryer holding high efficiency separation on drilling fluid and it will minimize drilling cuttings content in drilling fluids.

Which is used to process the oil bas drilling mud waste. It is also referred to cuttings dryer. It can help users to manage the oil base mud waste. It will save further treatment cost and get more dry disposals saved space or volume. The oil base mud waste after processed can be used to fill the ground or make bricks.

What is the structure of vertical cutting dryer?

It including but not limited to following items. Such as the motor, the screen basket, the gear box, the air knife, the pump, the supporting base, the control panel.

The air knife and the shaker screen basket are important components for whole drilling cuttings dryer. The working principle is similar with centrifuge decanter. However, difference is one centrifugal force is horizontal and the other is the vertical direction.

Why do we need vertical cutting dryer?

The liquid is forced to pass through the screen bowl openings, while “dry” solids are extracted by the angled flights attached to the cone, which rotate slightly slower than the bowl. Tungsten carbide protects the flights from abrasive solids and ensures long operational life. This aids in maintaining a constant gap between the scroll and screen bowl, which is crucial for proper operation.

Cuttings dryer holding high efficiency on drilling waste separation and it will minimize drilling cuttings content in drilling fluids. The cuttings dryer decrease disposal percentage benefit much on “0” disposal application. Separate drilling mud recycling by solids control system effectively. Recycle the lost mud caused by equipment failure, etc. The common spare parts are easy to be replaced. The wolfram carbide alloy knives on cones are changeable also minimize the whole device failure

Why use vertical cutting dryer?

Aipu produces 2 types of cuttings dryer. One is APVCD930, the other is APVCD700. However, most users prefer APVCD930 because of its larger capacity. The cuttings dryer model number means the internal screen basket diameter. 930mm means the diameter of the screen basket is 930mm. While the 700 means the diameter of the basket is 700mm.

Please find below the technical information on the cuttings dryer. If you have further questions or interest just contact AIPU freely. You will get the optimal solutions very soon relationship with the original brand manufacturer.

1. High quality premium bearing of FAG or SKF.
2. Longer life rotor flights.
3. Flights and rotor assembly are balanced separately.
4. High quality S.S screen basket with special design for longer life.
5. Air knife benefits screen cleaning without blinding.
6. VFD control panel available against request.

Technical specification of vertical cutting dryer

.