Q345B HDD Recycling Drilling Mud Equipment Solids Control System

HDD Recycling Solids Control System With Q345B Drilling Mud Equipment

What is Mud Recycling system (CBM/HDD/TMB/Piling)

Aipu Solids Control supply mud recycling system for CBM & HDD & water well drilling and other drilling that need drilling mud. Compact design is the key feature of mud solution for 200GPM, 350GPM, 500GPM, 800GPM, 1000GPM, 1500GPM, 2000GPM mud flow as well as desander mud plant (50 100 200 M³ H) for piling and TBM.

Specification

HDD mud recycling system working procedure

1. There is a drill pit at each side of drilling hole, a set of vertical slurry pump will set on top of mud pit for feeding shale shaker. The shale shaker screen will separate drilling cuttings and discharge out, fluids part will drop into sand trap through screen hole.

2. 1 or 2 or 3 sets of desander cyclone sit after shale shaker, one set of centrifugal pump will feed desander cyclong for second phase separation, solids out of desander will be discharge to shaker screen or cutting box directly and fluids over flow from desander will flow into desander compartment.

3. A quantity of desilter cyclones will sit after desander for fine solids separation, solids out of desilter will discharge to shaker screen or cuttings box, fluids over from desilter will drop into desilter compartment.

4. A mixing pump sit on tank skid for drilling mud transfer and feed mud into mud hopper for new mud remix by new chemicals. The mixing hopper can sit on top of tank or tank skid as per client’s demand.

Features of APMC recycler

• Circulating mud for better economic efficiency.

• Reduce environmental impact.

• Effectively mud process.

• Economical configuration.

• Easy operation and maintenance.

• Stable and reliable operation.

• Flexible proposal.

Mud recycling system application and effect

Mud reclaiming recycling mixing system is designed for mud recycling of trenchless. Such as tunneling shield, HDD, and pilings. It can help reduce costs and improve construction efficiency significantly.

The whole system consists of a mud recovery treatment unit and a mud preparation unit.

Before construction, using mud mixing device to blend freshwater with mud material, achieving the purpose of mud preparation;

Using a mud pump to supply the prepared slurry to the wellhead;

Return of waste mud from the wellhead is pumped to the shale shaker in the mud treatment unit, and the waste mud is removed through the mud shale shaker to remove a large amount of the waste solid particles. The treated slurry liquid will continue to be supplied to mud cleaner through the sand pump, after treatment the liquid can meet user requirements. Because after this system treated, solid particles content in the slurry liquid is 75 microns.

Introduction of Aipu 500GPM HDD mud recycling system

500GPM HDD mud recycling system is well used for horizontal directional drilling as well as mining industry with different electrical standard. AIPU is one of the leading supplier in China with different standard for drilling industry to suit client requirement. The whole system can be customized with different size mud tank, tank compartment arrangement, pipeline and valve layout, pump layout, etc. The tank is made by H beam, steel plate, square pipe, grating on top, handrail and ladder, etc.
 

Configuration of Aipu 500GPM HDD Mud Recycling System

 
1. 1 set linear motion shale shaker with 500GPM capacity,

1 set mud cleaner with 1 set shaker and desander desilter cyclones installed on second set shaker.

2. 2 sets centrifugal pump installed on tank skid for desander and desilter mud feeding.
3. 1 set mud agitator on third tank compartment to stop solids build up in tank bottom and corner.
4. 1 set mud tank 9 meters long to install all equipments on.
5. Pipeline arrangement, stairway, handrail, butterfly valves for mud tank arrangement.

Please come to us for any inquiry of solids control system, you'll get a optimal solution very soon.