Drilling Fluids Processing System For ZJ40 Rig Can Well Deep To
4000m
Drilling fluids processing system is the mud circulation system for
well drilling. ZJ40 rig is the common reference of oil rig can
drill well deep to 4000m.
Drilling fluids processing system configuration
Different drilling condition and users will request different mud
system configuration. But main equipment are same. The shale
shaker, the mud cleaner or hydrocyclone separators, degasser, mud
decanter centrifuge, pumps, agitator, mud guns, and so on
The difference among different configuration is flow rate. The mud
flow rate of mud pump will help to confirm mud system and equipment
selection.
Economical configuration on ZJ40 rig
Economical configuration is the system with necessary equipment and
unit. For ZJ40 rig, the economical one including 2 set shale shaker
holding capacity up to 280m³/h, 1 set mud cleaner, holding flow
rate up to 240m³/h. APZCQ240 Vacuum degasser. And 1 set middle
speed decanter centrifuge, also the screw pump
Mud tanks including the active tank, mixing tank, reserve tank,
trip tank, pill tank, and so on. Then the necessary auxiliary
equipment. Including mud agitator, centrifugal pump, mud gun,
mixing hopper, and so on. Also the lamps, control panel, pipelines,
valve, fittings, and so on. The ladders, walkway, handrail, and so
on
High level configuration of ZJ40 rig fluids system
Drilling fluids processing system have many flexible features. Such
as the tank volume, tank quantity, shaker and centrifuge
configuration. We can set totally 8 tanks. Including processing
tank, reserve tank, water tank, mixing tank, and so on
On the tanks, there are 3 sets shale shaker, 1 set mud cleaner,
totally 6 transfer and mixing pump. And 2 sets trip pump. Several
mud agitators and mud guns.
Many clients prefer large mud system since the efficiency and
better performance. Besides mud tanks volume, equipment quantity
and detail configuration will impact whole mud system operation
efficiency
Benefits of Aipu solids control system
Solids Control System manufactured by Aipu have a good performance
of cold-resistent, high temperature resistance, anti-explosion,
anti-leakage, anti-corrosion, raining proof, adapt to wicked
condition of well drilling.
There are intermediate pressure mud pipelines and rinsing pipelines
on the top of the tanks.
Behind the tank, there is a pressure bar type clear sand door. It
is appropriate and neat to open.
To use durable links between the tanks, it is convenient to set up
and dismantle, has a good scalability.
Accurate positioning between tanks, and can connect rapidly.
The drilling mud solids control level is high, the effect is good,
and the measurement of mud is accurate.
The tanks are composed of corrugated boards of the V type. Holistic
rigidity is good and the appearance is pleasing.
The surface is interpreted with sandblasting. The in-tank is
painted with intense anti-corrosion bituminous paint, and outside
of the tank is painted by the oil-proof and acid and alkali
corrosion resistant paint.
Comply with the requirements of remote and installation of the
drilling crew frequently.
Drilling Mud Solids Control System can be prepared according to the
customers’ requirements.
Aipu Solids Control's drilling fluids processing system
- Customized drilling mud purification system.
- Benefits of Low Solids In Drilling Mud.
- Increased drilling penetration.
- Increase bit or back reamer life.
- Reduce investment, but enjoy high efficiency.
- Reduce triplex mud pump, mud motor & surface equipment
maintenance cost.
- Reduced cleanup & haul off or disposal cost.
Please feel free to contact AIPU for more detail or assistance. You
will get a professional proposal very soon.
| Model | For mud store and mix |
| Flow rate | Customizable |
| agitators | Customizable |
| mud gun | Customizable |
| Tank | Customizable |
| Area | Customizable |
| Color | Customizable |
