Oil Gas Mud Mixing Pump For Well Drilling Fluids Circulation System

Oil And Gas Drilling Mud Equipment Of Mixing Pump Used In Well Drilling Fluids Circulation System

Information of drilling mud equipment of mixing pump 

Well drilling mud mixing pump is the integration of mixing hopper and centrifugal pump. We can set hopper and pump on skid together or separately. Hopper on tank top and pump on tank bottom skid. Considering whole mud system flow rate we can design the dual tandem mixing pump. Some users will request dual mixing hopper pump anyhow, since they will treat one set as spare one.

Technical parameters of APSLH jet mud mixer

What impact Jet mud mixing pump?

Mixing hopper hydraulic consumption should be as little as possible, otherwise the flow rate may decrease by too much
Distance between Venturi hopper and nozzle should be proper. The optimal distance should be 32~90mm
Output pressure should be designed properly. If the discharge port pressure is too high the flow rate of mixing pump will be lower than expected
The higher pressure at inlet port the higher flow rate of mixing hopper
The higher hopper mounted the lower mixing capacity
As its structure we also call it as mixing hopper pump or mud mixing pump. When the drilling fluid need to be mixed or compounded to change density, viscosity, dehydration we’ll need the bentonite or barite, also other polymers. When we feed the material directly into tank there will be big concentration ball or sedimentation. Especially when there might happen blow out, we need mix large quantity drilling fluid in short time. However, the mixture or agitation have to be finished via assistant equipment-jet mud mixer.
So the mud mixing pump is mainly to weight or configure proper drilling fluid for whole drilling mud solids control system. The jet mud mixer can be designed as dual hopper with dual pump, please contact us for more custom built service confirmation

Usage of jet mud mixing pump

Mud mixer is a single jet mud mixer combined with 45 Kw (or 55 Kw) sand pump and a jet mud hopper or a double jet mixer of two pumps and two hoppers.

The weighting hopper can be combined with a pump or be used independently with manifold valves with pump.

Put the drilling fluid materials (bentonites, barite powder) and the corresponding chemical additives (polymer) into circulating tank for increasing the total.

Application of Jet mud mixing pump

APSLH jet mud pump is a unit used together with the solids control system for petroleum drilling and horizontal directional drilling(HDD). The unit includes one sand pump, one venturi mud mixing hopper and one jet mud mixing hopper and pump that are installed in a base with pipe valves. It is safe and stable and can be moved conveniently. At the same time,we can make Twin-Hopper Unit with two pumps according to the user requirements.It is designed by AIPU solids control bentonite mud mixer,drilling mud tank jet mixer.

The jet mud mixer can be widely used in drilling mud system. Including the oil and gas drilling, the HDD mud recycling, the civil construction drilling mud process. As we know, during drilling there is mud lost and to maintain the mud property we need such equipment to prepare sufficient quality fluids

Besides the APSLH150-50, there are other models jet mixing pump. The difference including pump size, motor power, and the hopper size, the pipe line and fittings

Furthermore, we also provide different configuration on hopper, pipe and pump connection.

Benefits of APSLH jet mud mixing pump

The mature design and excellent performance. Powerful agitation and mixing during whole mud system criculation. Reliable performance and durable quality costs less on operation and maintenance. Flexible on configuration of pump and hopper. Cost effective solution for various users.

Installation of Jet mud mixing pump

Mud mixer is a single jet mud mixer combined with 45 Kw (or 55 Kw) sand pump and a jet mud hopper or a double jet mixer of two pumps and two hoppers.

The weighting hopper can be combined with a pump or be used independently with manifold valves with pump.

Put the drilling fluid materials (bentonites, barite powder) and the corresponding chemical additives (polymer) into circulating tank for increasing the total.