Fixed or VFD Conical Drum Shape High Speed Drilling Mud Decanter
Centrifuge
Summary of the decanter centrifuge
Decanter centrifuges also referred to decanting centrifuge or
centrifuge decanter. In drilling mud process for oil & gas
drilling there are middle speed centrifuge and high speed
centrifuge. They can be designed as fixed frequency and variable
frequency centrifuge.
Centrifuge main motor is 30kw (40hp), accessory motor is 7.5kw.
This centrifuge in stock is fixed frequency one. Upon clients’
demand we can configure the VFD panel for it. Then the speed will
be 0~3200rpm and VFD will lead better protection on motor as well
as whole centrifuge
Decanter centrifuge technical parameters
| Model | APLW450×842N | APLW450×1000N | APGLW355×1258D-N | APGLW450×1258D-N | APGLW530×1320D-N |
| Drum Dia. | φ450mm | φ450mm | φ355mm | φ450mm | φ530mm |
| Drum Length | 842mm | 1000mm | 1258mm | 1258mm | 1320mm |
| Lambda Ratio | 1.9 | 2.2 | 3.5 | 2.8 | 2.5 |
| Drum Shape | Conical |
| Speed | 1800rpm | 2200rpm | 3200rpm | 3000rpm | 2800rpm |
| Main Motor | 22Kw | 30Kw | 30Kw | 37Kw | 55Kw |
| Accessorial Motor | 5.5Kw | 7.5Kw | 7.5Kw | 11Kw | 11Kw |
| Max. Capacity | 40m³/h | 50m³/h | 35m³/h | 60m³/h | 65m³/h |
| Separation Point | 5~7microns | 2-5microns |
| Separation Factor | 815G | 1215G | 2035G | 2250G | 1817G |
| Feeding Pump Power (KW) | 4(submersible) | 5.5(submersible) | 7.5(submersible) |
| Dimension (mm) | 2600×1550×1650 | 2750×1550×1700 | 2900×1480×1650 | 2900×1550×1650 | 3300×1700×1750 |
| Weight | 3000kg | 3200kg | 3000kg | 3200kg | 4000kg |
Aipu decanter centrifuge advantage
All raw materials are high quality. Such as the screw conveyor,
bowl, the support frame, the surface paint, the motor, the control
panel, etc.
Usually, finish one set centrifuge may take 30 days. But now, only
in 1 week we’ll get all things cleared and make it arrive at port.
For other requirements or options we’ll give you optimal solution
soonest.
Finally, our aftermarket will definitely satisfy you on soon
response as 7×24 technique support. The centrifuge is rather mature
to save more cost on wearing parts as well as maintenance
AIPU high speed centrifuge spare parts
Main spare parts including the bearing, oil seal, the coupling, the
cushion base, the fuse, etc. These are rather easy to get in the
market and cost little.
Other application of Aipu decanter centrifuge
As we introduced before, the centriuges can be used not only in
drilling fluids process. They can be used in many industry. Related
to oil and gas industry or the drilling industry, they can be used
in slurry separation, the sludge treatment, the waste management,
and so on.
And in drilling fluids system, they are used to recycle or relcaim
the barite, too. When we use both middle speed centrifuge and high
speed centrifuge, the high speed one will be set behind the middle
speed one.
Professional of Aipu solids control
As a professional manufacturer of oilfield solids control
equipment, AIPU products are appreciated by clients because of high
quality at reasonable cost.Trust AIPU solids control will be your
strong assistance. Our solutions for you and clients will be the
optimal one and lead more reasonable profits. AIPU products have
served KDC, Burgan, SINOPEC, CNPC, Honghua, Petronas, Pertamina,
and so on drilling company and rig manufacturers.
