Customized Bevel Gear 50Hz 60Hz Solids Control Mud Agitator

APMA Mud Tank Agitators With Bevel Gears For Oil And Gas Drilling

APMA series mud Agitator is a device mounted on a mud tank for agitating the drilling mud to prevent the drilled cuttings and fine solids from sedimentation. Nearly every large compartment of mud mixing and storage tank should be equipped with mud agitators to maintain the proper properties of drilling mud that will pump back to the borehole.

The oilfield mud tank agitator is configured with an explosion-proof motor, reduction gearbox, impeller, and shaft with assembly bushings. Canted blade impeller is commonly used. Horsepower, mechanical configuration, impeller diameter, number of impeller and shaft length are customized to tank dimensions, and maximum mud weights. Here is a list of our recommended configuration.

Bevel gearbox features?

Bevel gear makes it possible to change the operating angle.
Differing of the number of teeth (effectively diameter) on each wheel allows mechanical advantage to be changed. By increasing or decreasing the ratio of teeth between the drive and driven wheels one may change the ratio of rotations between the two, meaning that the rotational drive and torque of the second wheel can be changed in relation to the first, with speed increasing and torque decreasing, or speed decreasing and torque increasing.

Sizing Agitators

Regardless of what style of agitator or impeller is used, proper sizing of components is critical. Once compartment size has been determined, the impeller diameter and corresponding horsepower requirements must be calculated. If the maximum mud weight to be used with the rig is not known, it is best to base all calculations on 20 lb/gal fluid (2.4 specific gravity [SG]). This will give a sufficient safety factor to allow agitation of most any fluid without fear of overloading the motor. Most oilfield agitators range in shaft speed from 50 to 90 rpm.

Features

• Helical-bevel gearbox
• 5-30 HP available
• Sized to process 20 ppg drilling fluid
• By unitizing the motor and gearbox, weight and space requirements are reduced.
• The customized configuration is available

Moreover, the APMA series agitator is flexible on gearbox and motor configuration. Such as worm and worm wheel reducer, helical bevel reducer. The motor certified by IEC, ATEX, and so on

Please check below technical specifications for your reference. And some configuration is customizable. Please contact us for more details

The mud agitator with canted blade impellers is introduced to most drilling mud tank system. The effective mixing and agitating performance help maintain proper mud characteristics. Our quality manufactured heavy-duty and easy operation agitators are the best choice for your drilling mud tank agitation system.

For any interest or demand, please feel free to contact AIPU. You will get a free offer on an optimal solution, you will get a professional proposal very soon.