Offset Book A2 CTP Plate Printing Machine

  EcooSetter T800 series Manual Thermal CTP are for A1 or B1 paper size , Maximum size of plate: 1,163×940mm,with the output speed 16 to 28 plates per hour. 

   T400 is the A2  CTP with the max plate size 890*660mm. 

   The CTPs are made with separate 830nm laser diodes, if one channel diode is broken,the others will not be infulenced for the machine working.

They are quite reliable and affordable Prepress printing plate making equipment.

 Application

  EcooGraphix Thermal CTP (Computer To Plate) Plate making Machine is the first Prepress necessity of quick short-run offset book or commercial printing. It can Output the Images on the computer to Printing CTP plate directly though the CTP machine and save the film and labor.

By the EcooGraphix CTP, the customer can get Excellent output image quality,highly reliable stability,less space occupied with more flexibility.

 Other Similar Models:

Other models we can supply:

Manual Thermal CTP/CTCP:

T/UV 400E/S/F (laser diodes): max plate size 800*690mm

T/UV 800E/S/F(laser diodes): max plate size 1163*940mm

Online 8up Thermal CTP/CTCP:

T/UV 800EA/SA/FA/XA (laser diodes) with optional single cassette autoloader

T800QE/S/H (laser diodes) with online autoloader ,bridge and optional punching unit

T800QF/V/X(256CH laser head) with online autoloader,bridge and optional punching unit

VLF thermal CTP/CTCP:

T/UV 1600S/SX: max plate size 1470*1180mm

T/UV 1600M/MX: max plate size 1680*1350mm

Flexo CTP:

FL400/600/800(laser diode)

FL5080(256CH laser valve head): max plate size 1270*2032mm

Thermal/UV CTP Processor:

P900E/P1250E/P1500E

Flexo CTP Processor:

FP600/900/1200

Machine Technology:

1) Superior dot quality reproduction proven by worldwide market:

1%-99% dot reproduction

Up to 300lpi screening ,2400 dpi or 2540dpi optional

2) Worldwide top class components and parts supplied by international well known suppliers from Japan, USA, and Germany.

3) Long lifetime and warranty of parts: laser diodes lifetime at more than 10,000 imaging hours. (approximately 20,0000 plates)

4) Long warranty of the machine: 3 years warranty (free replacement of all parts)

Low Cost of Parts: after 3 year warranty, very low cost of parts. for example, laser diode at US$250 per piece.

5) Guaranteed Service: installation and training conducted by technical engineer from factory, ensuring best setup and training to be achieved. Regular remote maintenance to be conducted every 2 month. Proactively revisit by engineers to be conducted. 7x24 hours service response.

6) Proven Worldwide market leader: (Some highlights installations)

Over 6000 units installed worldwide over past 10 years

USA and Canada: Over 50 units in USA and Canada in last 3 years by leading US press manufacturer.

Turkey: 35 units installed in Turkey by Esen Graphics

Installations in other countries UK,Italy,Spain,Hungary,Russia,Mexico,Brazil,Colombia,Ecuador,South Africa,Nigeria and etc.

• CTP working environment:

Temperature: 15℃-30℃ (an air-conditioner is recommended)

Humidity: RH10%-70%, Non-condensing

Atmosphere: No smoke, No corrosive gases, Ash<0.1mg/M3.

Lighting: Natural illumination, no direct sunlight

Floor: The floor should bear the pressure of 500kg/m2. Anti-static floor or tile floor.

Ventilation: natural ventilation

Thermometer and hygrometer (pointer type or digital type) should be kept in the center of the room.

• Power supply:

CTP Ecoosetter Series: single phase, independently grounded, less than 3Ω; 50/60Hz, 4KVA.

An online uninterrupted power supply(UPS) unit is required, and the battery should be able to sustain at least 5 minute alone.

• Other equipment customer should prepare:

Computer: one computer is required to control the CTP. Configuration: I3 or above, 500G or above, Windows 7/8/10, English operation system (US);

Air: separated air-compressor or central air. ≥0.8Mpa, ≥175L/min. If separated air-compressor, the air tank should be ≥30L.

Processor

Plate and chemicals

Plate dot measurement tools (Replate or IC plate)

• Workflow

RIP: customer should have workflow to generate 1-bit-tiff file. Ecoosetter CTP has program to receive 1-bit-tiff file.

Our Factory

FAQ

Q:What are your main products ?

A: Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP , CTCP ,

VLF CTP, Flexo CTP , Processor , Offset Plates ,Offset Inks , Offset printing blankets ,

Postpress Packing equipment and so on.

You can get the equipment and consumables all in one and no worry about the after-sales

service from our company.

Q:Is there any certification for your CTP machine?

A:Yes, All our CTP machines have been certified by SGS and CE

Q:Can you also supply the Workflow and RIP?

A:Yes, we can provide the Workflow Brain New and RIP Compose V13.

Q: Where is your factory?

A: Our factory is in Hangzhou city, about 1hour by train from Shanghai.

Q:What is the production time ?

A: Usually 20days, a little longer for customized model.

Q: What is the warranty time for the machine?

A: 3years’warranty for CTP machine. If customer use EcooGraphix CTP plate, all the CTP parts will be guaranteed for lifetime with no service charge.