Ecoographix Automatic Die Cutting Machine With Stripping 800X580MM
|
|
Die-Cutting Machine With Stripping High Quality Automatic 800X580MM
Model: EcooSpark
• Introduction •
TD800S fully automatic die cutting machine is the newest product of T serials. 7 sets of gripper bars with grippers made of lightweight and durable aluminum alloy with ultra hard coat and anodized finish ensure accurate and consistent paper registering.
• Specification • Model ECOO-TD800S Max. Sheet Size(mm) 800 x 58 Min. Sheet Size(mm) 310 x 310 Max. Die cutting size(mm) 790 x 570 Min. Gripper margin(mm) 8 Height cutting rules(mm) 23.8 Inside chase size(mm) 940 x 610 Stock range Cardboard: 800-2000g/m² B flute Max. Pressure(N) 200T Max. Die cutting speed 7000s/h Feeding pile height(mm) 1300 Delivery pile height(mm) 1000 Noise ≤ 85dB(A) Main motor(kw) 7.5 Total of power(kw) 15 Weight of machine(T) 14.5 Overall dimension(mm) 4900 x 2000 x 2000
• Machine Spare Parts •
Feeding Unit • Pile tray with handle allowing manual lateral correction of the pile during production • Stream-wise feeding system with a highest speed of 120 sheets per minute • 2 suction cups each for lifting paper, 2 suction cups for moving paper • Height and angle of suction heads are easily adjustable • Electronic safety devices preventing feeder pile from over ascending • Micro-adjustment is available for transversal positioning of pile table • Precision double-sheet detector • Easy changeover of pull and push side guides simply by turning a
bolt without the need of removing and replacing complete side guide • 2 front guides with micro-adjustment and the side guide is
adjustable by wheel handle • Photo-electric detector with automatic stop system on feeding
table in case of paper jam • Separate drive controls of feeding unit & the main machine
for easy make ready • PLC and electronic cam for timing control
Diecutting Unit • Siemens main motor controlled by Schneider inverter control • Micro-adjustment of cutting force by worm gear driven by motor and controlled by touch screen • The pressure accuracy can be up to 0.01mm • Crank shaft made of 40Cr steel • Machine frames made of Q235-A Steel, upper and lower platens made of QT60 ductile iron with resin coated sand with Meehanite Die Cast Iron Technology • Cutting chase turn-over device • Overload protection device with torque limiter for the highest
safety of operator and equipment • 7 sets of gripper bars with grippers made of lightweight and
durable aluminum alloy with ultra hard coat and anodized finish ensure accurate and consistent paper
registering • After long run test and delivered in pairs, main gripper, chain
from Subaki, Japan • High pressure index drive system for gripper bar positioning
control • Pneumatic lock-up and release of cutting chase • Centerline system for quick job changeover
Stripping Unit • 3-action movement structure with upper, middle and lower stripping frame to facilitate die change • Stripping pins or male/female die can be used for different stripping jobs • Match with the centerline registration system in the diecutting section, the same system also apply to the stripping system to minimize changeover time. Accurate positioning can increase production efficiency • The up/down movement of upper stripping frame is controlled by motor which makes adjustment easier Delivery Unit • Safety photo-electric devices preventing over- ascending and over-descending of delivery paper pile • Adjustable depressor brush helps unloading paper from grippers and piling up paper • High pile design up to 1020mm • Automatic auxiliary belt table available for non-stop delivery • Feeder movement and speed control can be adjusted in the delivery unit
Electric Parts, Operator Interface and Safety Detector • The high speed Japanese industrial Omron PLC system • Omron operator interface with touch screen • Omron Electronic cam switch and encoder • Electronic detectors, micro switched and photo- electric cells controlled by PLC on entire machine • Producing And Packaging •
• FAQ•
Q: What about the Installation and after-sales technician support? |
||||||||||||||||||||||||||||||||||
| Product Tags: Automatic Die Cutting Machine 800X580MM Automatic Die Cutting Machine With Stripping 7.5kw Automatic Die Cutter |
|
ECOO VD3350 Max 100m Per Minute Digital Label Self Adhesive Sticker Slitter |
|
VD3350 Digital Label Die Cutter With Slitting And Laminating |
|
TD 1650S Automatic Stripping Corrugated Die Cutting Machine |
|
TD800S Fully Automatic Die Cutting Machine |
|
VD3350 Max. 450mm Digital Label Self Adhesive Sticker Slittier |
|
TDS790 Thermal Foil Stamping Automatic Die Cutter 5500s/h |