Low Chemistry CTP Offset Printing Plate Eco Friendly 405nm

 Newspaper Printing Plate Low Chemistry Violet Offset Printing Aluminum Plate 

Introducation 

EcooGraphix Low-chemical Violet Plate Ecoo-V can be used for newspaper printing. It is an environmental friendly product. Compared with normal Violet CTP plate, Ecoo-V keeps original photosensitive features and printing compatibility.

Model
ECOO-V

Plate Type
Low chemistry violet plate, negative printing

Application
Newspaper Printing

Substrate
Electro chemically Grained and Anodized Aluminum

Gauge
0.20, 0.25, 0.30, 0.40(mm)

Maximum short grain width
Maximum width 1320 mm

Developer
Developing gum

Length of Run
Unbaked: 200,000 impressions;
Baked: 500,000 impressions(dependent upon image resolution, press,
press chemical, ink and paper conditions)

Plate setters Capability
All the main brands violet CTP in market, laser power no less than 30 mw

Aluminum
Standard 1050 Alloy

Exposure Energy
50-60 μj/ cm² (based on plate setter and developing condition)

Developing Time
20±3 sec

Developing Temperature
28±2 ºC

Spectral Sensitivity
405 nm

Resolution
150lpi (2-98%), under 1800dpi, 25μm line can be produced.

Preheat
95-121 ºC

Brush Speed
100 rpm

Shelf Life
12 months under recommended storage conditions

Storage and Handling
Store plates flat in their packaging, away from excessive cold, heat or high humidity.
Recommended condition is: temperature 15-28ºC and RH between 30-70%;
Handle with care, the maximum height is 1.2m'
Open the box under yellow light. Sealed the box with remained plate to avoid moisture.

​

Features 

​

​

 Producing And Packaging 

From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.

 Certificates 

 FAQ 

Q1: Can I get a sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This can be returned to you in your first order.

Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.

Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.

Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.

Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM

Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.