Negative Acting Low Chemical Violet CTP Printing Plates

 Negative Acting Low Chemical Violet Plate Offset CTP Plate 

 1. Features 

♥  Simplifying the processing, only 3 steps including preheating, developing and drying.

♦  Reducing chemical consuption, saving water.

♣  Weak alkali developer maximumly avoid developing inconsistency due to exhausted developer. It makes print wuality more stable.

 2. Specification 

Model

ECOO-V

Plate Type

Low chemistry violet plate, negative printing

Application

Newspaper printing

Substrate

Electro chemically grained and Anodized aluminum

Gauge

0.20, 0.25, 0.30, 0.40 mm

Maximum Short Grain Width

Maximum width 1,320 mm

Developer

Developing gum

Length Of Run
Unbaked: 200,000 impressions;

Baked: 500,000 impressions(dependent upon image resolution, press, press chemical, ink and paper conditions)

Plate Setters Capability

All the main brands violet CTP in market, laser power no less than 30 mw

Aluminum

Standard 1,050 alloy

Exposure Energy

50-60 μj/cm²(based on plate setter and developing condition)

Developing Time

20 ± 3 sec

Developing Temperature

28 ± 2 ºC

Spectral Sensitivity

405 nm

Resolution

150lpi(2-98%), under 1800dpi, 25μm line can be produced

Preheat

95-121 ºC

Brush Speed

100 rpm

Shelf Life

12 months under recommended storage conditions

Storage And Handing
Store plates flat in their packaging, away from excessive cold, heat or high humidity.
Recommended condition is: temperature 15-28ºC and RH between 30-70%;
Handle with care, the maximum height is 1.2m'
Open the box under yellow light. Sealed the box with remained plate to avoid moisture.

​

​

 3. Application 

EcooGraphix Low-chemical Violet Plate ECOO-V can be used for newspaper printing. It is an environmental friendly product. Compared with normal Violet plate, ECOO-V keeps original photosensitive features and printing compatibility.

 4. Customer's Feedback 

 5. Plate Making 

 6. Producing And Packaging 
 

From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.

 7. Certificates 

 8. FAQ 

Q1: Can I get the sample ?
A: We are very glad to provide some sample for you to test. We usually provide 5-15 pieces plates for free, but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
 

Q2: What is the cost for the CTP plate sample freight ?
A: The air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the pick-up service from your local agent.
 

Q3: How long can the sample be ready ?
A: It usually takes about 3 days to prepare the sample.
 

Q4: Can I visit your factory ?
A: You are warmly welcome to visit our factory! Our company is in Hangzhou city, which is about 1.5 hours by train from Shanghai.
 

Q5: How many square meters CTP plates can feed one 20' container ?
A: About 20,000-25,000sqm.
 

Q6: Can I take my own brand and label on the packing ?
A: Yes, we can provide the OEM with the customer's brand and label.