1500mm Paper Sheet Foil Stamping and Die Cutting Machine

1500mm Paper Sheet Foil Stamping and Die Cutting Machine

  1500VQ fully automatic die-cutting and stripping machine has a high-pressure fan that feeds paper at the front edge and controls the air volume with variable frequency, adapting to most types of paper.

  The top paper and bottom paper that were mounted incorrectly will not be damaged and can be reused to reduce waste. "One-click machine adjustment" digital management solves the problem of paper adjustment that is time-consuming, laborious, and difficult to master.

   Just enter the parameters of each order paper, and after one-click startup, the eight adjustment steps will be automatically adjusted in place. Greatly improve work efficiency. At the same time, the high-capacity storage space can record 490 orders at a time.

   When the order is used again, just call up the record and it can be adjusted directly. Saves time for re-adjustment. In this way, whether it is a long order or a short order, adjustments can be easily made.

Technical Specifications:

Leading edge paper feeding section

1. The front paper blade can be adjusted up and down according to the thickness of the paper;
2. The automatically adjusted baffles on both sides can quickly adjust the paper width to the basic position, and can also make fine adjustments to the position independently;
3. The configured high-pressure blower has independent frequency control of air volume;
4. Using the current popular cutting-edge paper feeding device, the adaptability to paper is greatly increased.

Paper transport section

1. It has a professionally configured conveying deceleration mechanism, which can play a buffering role and protect the front edge of the cardboard from deformation when it reaches the front edge, ensuring die-cutting accuracy;

2. Equipped with wear-resistant paper conveying belt;

3. A set of side positioning push gauges on each side of the left and right sides. Easy to adjust and save time;

4. The phase adjustment mechanism can adjust the paper feeding time without stopping the machine during operation, saving time and efficiency.

Paper die cutting department

1. Crankshaft link type plane movable die-cutting workbench;
2. Highly stable upper flat fixed die-cutting workbench;
3. The combined transmission of the main drive gear set and synchronous belt is smooth and durable;
4. High torque pneumatic clutch/brake;
5. Multi-piece cam intermittent transmission mechanism improves the service life of the machine;
6. Torque clutch protects INDEX from injury;
7. Inclined pressure fine-tuning device, the overall pressure adjustment range is ±1.5mm;
8. Imported paper gripper tooth row transmission chain. Ensure the accuracy of the machine;
9. The whole machine has 8 rows of gripping teeth, and is equipped with 12 movable gripping teeth and matching fixed tooth pillows;
10. Accurately pre-position the front and rear tooth rows to ensure accurate and consistent step positioning;
11. Each department has paper detection sensors to monitor the entire paper process and reduce unnecessary paper waste;
12. The central positioning system of the template makes plate changing simple and fast;
13. Large-screen electronic fault display and speed display (color LCD) monitor the operation of the entire machine in a timely manner;
14. The forced lubrication system of each part adopts a cooling circulation device equipped with an oil pressure display and an oil cutoff alarm device.
15. It adopts the gear transmission form, which is stable, accurate and durable; it reduces the instability caused by the previous chain drive and belt drive, which affects the accuracy and life of the whole machine and other unfavorable factors.
16. The high-torque cam divider drives the paper feed row to make the operation more stable and reduce the phenomenon of plate loosening during the die-cutting and scrapping process. It is also equipped with a high-torque overload protection system to protect the machine from damage when overload occurs.
17. The central positioning system used in the die-cutting plate frame makes it easier and faster to replace the blade. Save time when changing versions.