Thermal UV CTP Plate Developer Offset Printing Consumables

                            Positive UV - CTP Thermal plate Developer Offset Printing Chemistry 

  Each CTP plate supplier has its own set of standard development data tested. Although the energy of the plate will fluctuate during the production process, this is only a small change. We can solve it by fine-tuning the developing machine. For this problem, under normal circumstances, we first open the developing machine, input the standard data provided by the plate supplier into the control system of the developing machine, and first put a few waste plates into it to raise the temperature of the developing machine to make the machine faster. Stable, we fine-tune the developing machine according to the general development situation to achieve the results we want.

   In addition, pay attention to the requirements of the developer during the development process.

   Developing CTP plates is the most critical link in CTP plate making. A lot of our work is focused on this link. For now, a large number of plate suppliers will provide plates that match their own plates. Matching developer, because the accuracy of CTP technology in restoring dots is very high, there are very high requirements for the chemical composition and development temperature of the developer. Generally speaking, we have to measure the temperature of the developer and the development tank before development. The temperature difference between the four corners shall not exceed 0.3℃.

Product: DEVELOPER COMPONENT (Sodium Gluconate Solution)

• Hazardous Ingredients / Identity Information

Component Sodium gluconate 10% , CAS No.: 527-07-1

Others Active Solvent 3% , CAS No.: 28519-02-0

Water 87%, CAS No.: 7732-18-5

• Physical / Chemical Characteristics

Boiling Point: N/A

Vapor Pressure: N/A

Vapor Density: N/A

4.0 Solubility in Water: Solubility in Water 100%

Appearance and Odor: Light Yellow Liquid, slight odor

Specific Gravity: 1.06g/cc

5.0 Melting Point: 206 °C (dec.)(lit.)

Evaporation Rate: N/A

• Fire and Explosion Hazard Data

Flash Point: N/A

Extinguishing Media: Water and sand, Foam, Dry Chemical, CO₂

Unusual Hazards: Avoid liquid accumulations and sources of ignition.

FAQ:
1. What are your main products ?

EcooGraphix is a leading and professional Supplier for Prepress Solution , Printing Materials and Post Packing Equipment.
Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP , CTCP , VLF CTP and CTCP, Flexo CTP , Processor , Offset Plates ,inks , blankets , postpress Packing equipments and so on.
Our partners in USA,Canada,Mexico,Colombia,Turkey,Hungary,South Africa and so on are very pleased with our Technician Support service and product performance.
We can also supply the thermal CTP plate(single and double layers),positive CTCP plates(single and double layers) and Chemistry free CTP plate.
You can get the prepress equipment and consumables all in one and no worry about the after-sales service from our company.

2. Where is your factory ?
Our CTP machine factory is located in Hangzhou city , which is about 1.5 hour by train from Shanghai.
You are warmly welcomed to visit our factory!

3. What is your warranty for the CTPs ?
Three years' Laser Head and main spare parts for the CTPs, One year for the Processor.
If the customer uses Ecoographix CTP plate with the CTP machine,we will provide the Lifetime Warranty.

4. What is the Lead Time?
Usually 10-30 days, and we will try our best to meet your demands.

5. Can you also supply the Workflow and RIP?
Yes, we can provide the Workflow Brain New and RIP Compose V12.

6. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions,we will be at your disposal 7x24 hours.