ECOO-W Low Chemistry Plate , Similar product as Agfa Azura AND
Kodak Sonora, only required to be processed in Low chemstry
developer after imaging. The wasted developer water can be
discharged into sewing system without addtional treatment.
Specification
| Model | Ecoo-w |
| Plate type | Non-ablation thermal-Negative type |
| Application | High grage commercial and newsprinting |
| Substrate | Electrolyte graining and Anodozed AL substrate |
| Thickness | 0.15mm/0.27mm/0.3mm/0.4mm |
| Spetrum scope | 800-850 nm |
| Plate setter | Various dominant thermal platesetters in the market |
| Low-energy imaging | 140 mj/m² |
| Recommended screen method | 1-98@ 200 lpi AM/FM and mixture |
| The paper number of start-up | < 20 sheets |
| Safety light | 1 hour under fluorescent lamp, no direct irradiation with natural
light, 4 hours under yellow light. |
| Run length | 100000 impressions, actual run length depend on printing conditions |
| Baking | 200-250 ºC, 3-5 min, 200000 impressions |
Specification of sominant plate setters recommended
| Platesetter | Kodak Trendsetter | Lottem 400(TH1.7) | Magnus 400 | Screen 8600s |
| laser energy | 15-17w | 300-320 mw | 19.5-21.5w | 80-90% |
| drum speed | 250-300 rpm | 850-900rpm | 400-450rpm | 800-900rpm |
| working resolution | accroding to requirement | accroding to requirement | accroding to requirement | accroding to requirement |
| require parameters setting | Focus/zoom | Focus/zoom | Focus/zoom | Focus/zoom |
Processing condition
| Processor | Ecoographix processor/G&J PROCESSOR |
| washout liquid | Ecoo EW-1 |
| temperature | 18-25ºC |
| time | 20-40 SEC. |
Application
Suitable for sheet-fed offset press or high speed rotary offset
press.
Run length: 100000 impressions
Suitable for different types of traditional inks and fountain
solutions, including alcohol's substitutes as fountain solutions.
Transpotation and storage
Packed in seal and stored by means of preventing from
light/moisture, over heat and high humidity.
Recommended conditions: 18ºC-24ºC, 40%-50% RH
Avoid saliva, water stains, water mist and other aqueous solution
contaminating the plate surface before plate-making.
If the plates can not be used up after unpacking right away, the
rest should be put into the original package, then seal it to
prevent from moisture.
Q&A for plate products
1. How long is the lead time?
The lead time is normally 30 days.
2. Do you offer free plate samples?
Yes, we offer free testing samples maximum 12 pcs for each size but
with delivery fee collect.
3. How do you guarantee stable quality?
There are 3 inpecting procedures: 1, automatic on-line 24h scanning
detector; 2, random sampling per 15 mins at the producing line; 3,
manually full inspection before packing.
4. Do you have accompanying plate making products to enable
one-stand easy purchase for some end users?
Yes. CTP machine, processors, developers, ink, blanket and some
common fihishing machines are also within our category.
5. Payment term
Normally, 30% deposit, 70% before shipping.
