Lightweight Single Use KN95 Respiration Face Mask

Lightweight Single Use KN95 Respiration Face Mask

Product Features:

1. Disposable, single-use, breathable, light and environment-friendly;

2. High elasticity ear loop help fit different users and dual point attachment helps provide a secure seal;

3. Adjustable nose piece for extra comfort;

4. At least 95% filtration efficiency against certain non-oil particles.

[Product Scope and Use] It is suitable to protect the dust, smoke and mist that are produced by mechanical force at a concentration below 10 times the occupational demand limit and produce harmful volatile gases.

[Product performance] The appearance of the mask should be neat and intact, and the surface should not be damaged or stained: the four sides of the mask should be pressed flat and dense. There must be no leakage: the connection strength at the connection point between each mask band and the mask body should not be less than 10N; the mask band should be easy to wear and wear; the particle filtration efficiency (PFE) of the mask should be ≥95%.

Instructions for use:

Ear strap type: 1. The nose clip is facing up. The side without the nose clip is facing the face, and pull the ear strap on each side with both hands. The mask first rests against the chin, pulls the ear strap toward the ear, and hangs on the ear to adjust to a comfortable state. 2. Place the fingers of both hands in the middle of the nose clip, press inwards and move the fingertips along the nose clip to both sides, until the nose clip is fully pressed into the shape of the bridge of the nose. Pinch the mask with one hand only Tightness. 3. Before entering the work area, the user must check the adhesion of the mask to the face and face: ① Cover the mask with both hands to avoid affecting the position of the mask on the face and ensure good sight. ② Inhale quickly. If the air leaks from the bridge of the nose, the nose clip should be readjusted according to step 2. If the air leaks from the edge of the mask, the ear strap should be readjusted. 4. When removing the mask, do not touch the front of the mask, first remove the mask band, and just hold the mask band by hand and discard it into the waste container.

Precautions,warnings and information

1. Check whether the packaging is intact before use, and confirm the external packaging mark, production date, and validity period, and use it within the validity period.

2. Cannot be used for painting and sandblasting operations, and cannot protect against harmful gases and vapors. This mask does not generate oxygen, cannot Use in an environment with an oxygen concentration below 19.5%. Do not use in an environment with oil mist.

3. Before using this protective mask, the wearer should first receive training and suitability testing for proper use.

4. When the concentration of pollutants reaches the concentration immediately threatening life or health. Do not use this protective mask.

5. When you feel difficulty breathing, dizziness or other discomfort: you should leave the contaminated area immediately.

6. When the product is damaged and the respiratory resistance becomes too large, a new mask should be replaced.

7. Check the protective mask before each use to ensure it is in good working condition. Check all parts of the protective mask, including two ear straps and nose clips, for signs of damage.

8. Do not modify, clean, abuse or misuse this protective mask.

9. If the beard, facial hair or other facial features prevent the face from getting close to the edge of the mouth camp, this protective mask should not be used.

10. Be sure to read the instructions and restrictions and precautions carefully before use. Improper use will reduce the effectiveness of the protective mask, and may cause disease or permanent damage to health.

11. After the product is used, please handle it according to the requirements of the environmental protection department or relevant units. Warning] This product is only used for respiratory protection against certain particulate matter; the maximum use temperature is: 50C; incorrect use can cause illness or even death. For the correct method of use, please refer to the information provided by the manufacturer on the box, please ask your supervisor or call the hotline: 4000 333 -088.