The Adjustable Height ESD PCB Storage Trolley is built for SMT and
electronics workshops that need to move and store circuit boards
safely between stations. Its conductive steel frame carries
anti-static ABS-coated rails that hold PCBs upright and apart, so
boards travel without touching each other and without building up
the static charge that damages fine-pitch components. Because the
rail pitch adjusts across a wide range, the same adjustable ESD PCB
storage trolley accepts narrow prototype boards and wide production
panels without extra tooling. The frame is welded and powder-coated
in a conductive finish, then fitted with grounded conductive
casters so the whole cart stays tied to the shop floor ground while
it is pushed along an aisle. Operators can load, move, and unload a
full magazine of boards in a single trip, which cuts handling
touches and the associated risk of edge damage and electrostatic
discharge.
Key Features- Adjustable Rail Spacing: Anti-static rails slide and lock across a wide pitch range, so the
SMT circuit board handling rack holds different board widths
without dedicated fixtures.
- Conductive Anti-Static Construction: A steel frame with conductive powder coating keeps the whole
trolley inside the 104 to 109 ohm window expected for ESD-protected areas.
- ESD-Safe PCB Contact: Anti-static ABS-coated rails cradle each board on soft,
non-scratching surfaces that protect copper traces, solder mask,
and fine-pitch devices.
- Stable Load Capacity: A welded base and reinforced uprights carry a full magazine of
boards up to 300 kg without flexing or tipping during transport.
- Smooth-Rolling Conductive Casters: Four grounded swivel casters, two with brakes, keep the cart
grounded and let a single operator steer a fully loaded trolley
through tight aisles.
- Space-Saving Vertical Storage: Boards stand on edge in a compact footprint, freeing valuable
bench and floor space while keeping boards visible and easy to
count.
Technical Specifications| Parameter | Specification |
|---|
| Frame Material | Conductive welded steel, powder coated |
| Rail Material | Anti-static ABS coated aluminum rail |
| Surface Resistance | 104 – 109 ohm |
| Slot Capacity | 50 / 100 slots (selectable) |
| Slot Width Adjustment | 10 mm – 380 mm, adjustable |
| Load Capacity | Up to 300 kg |
| Casters | 4 x 100 mm conductive swivel, 2 with brake |
| Overall Dimensions | 1200 x 700 x 1400 mm (custom sizes available) |
| Finish | Conductive black powder coat |
| Operating Environment | 0 °C to +40 °C, RH 20% – 80% |
| Certification | ISO 9001, RoHS compliant |
This SMT circuit board handling rack is specified wherever boards
move between machines, benches, and stores. It is commonly used
between SMT printers, placement lines, and reflow ovens, at AOI and
test stations, and in board stores and kitting areas where a
controlled magazine is needed. It also suits electronics repair and
RMA benches, laboratories, and any workshop that must keep
assemblies static-safe while moving them in volume.
- Between SMT printers, placers, and reflow ovens
- AOI, X-ray, and functional test stations
- PCB stores, kitting, and staging areas
- Electronics repair and RMA benches
- Laboratory and prototype build areas
- Cleanroom and ESD-protected production floors
Product Q&A Q: How does the adjustable rail system work?Each pair of anti-static rails slides and locks on the uprights, so
an operator can set the pitch to match a board width in seconds.
That lets one adjustable ESD PCB storage trolley serve narrow
prototypes and wide production panels alike.
Q: Is the trolley really ESD-safe on a production floor?Yes. The conductive steel frame, conductive powder coating,
anti-static rails, and grounded casters keep the whole cart inside
the 104 to 109 ohm window expected for the SMT circuit board handling rack, so
boards stay protected while the trolley rolls along an aisle.
Q: Will the rails scratch or mark the boards?No. The anti-static ABS coating is soft and non-abrasive, so it
cradles each board without scratching copper traces, solder mask,
or fine-pitch components.
Q: What load can it carry and is it easy to move?The trolley carries up to 300 kg. Four grounded swivel casters, two
of them braked, let a single operator steer a fully loaded cart
through tight aisles and lock it in place at the bench.
Q: What is the minimum order quantity and delivery time?The minimum order quantity is 10 pieces, and standard orders ship
within 15 to 25 days after deposit confirmation. Custom slot counts
and sizes are quoted individually.
Packaging & Quality AssuranceEach trolley is partly assembled and packed in a foam-lined export
carton or on a pallet, with rails and casters protected for
container shipping. Every batch is checked for surface resistance,
dimensions, adjuster travel, and load stability, and the records
are kept on file so a buyer can trace the values of a delivered
lot. The product is RoHS compliant and made under ISO 9001 quality
management, and third-party inspection before shipment is welcome
so your adjustable ESD PCB storage trolley matches the
specification you approved.
