B16.9 Carbon Steel Straight Sch20 Tee Forming Machine

B16.9 Carbon Steel Straight Tee and Reducing Tee Hydraulic forming machine

Automatic cold forming tee machine and the manual type automatic cold forming tee machine both have the advantage. Automatic type ,the operation is easy ,because all controllers are controlled by the auto system . Manual type is easy for after sale service and it is not easy to broken and once is need to repair and the manual type cold forming tee machine is very easy for repair . So both type cold forming tee machine are good for the clients. Now we have office in India and Iran for after sale service and we will have good after sale service system for the our client .

The tees are pipe fittings and pipe connectors.Also called pipe fitting tee or tee, tee joint, used in the main pipe to branch pipe.

The tee is divided into equal diameter and reducing diameter. The joint end of the tee is of the same size.The main pipe size of the reducing tee is the same, while the branch pipe size is smaller than that of the main pipe.

A tee is a pipe fitting for a pipe branch.For the use of seamless pipe manufacturing tees, the current commonly used technology is hydraulic bulging and hot forming two kinds.

      Main Cylinder:ID:650mm,OD:800mm, Piston:400mm,:effective distance:500mm,Press:31.5Mpa=1044.7tons one set

• Side cylinder:ID:600,OD:700mm, Piston:750mm,:effective distance 300mm,pressing:31.5Pa=890.19tons two sets
• hydraulic pump:oil pump 63SCY-14-1B 2 sets

CB-50 2sets

4..Assistant oil pump: Y-30 Two set

Y-2.2one set

5. Thinkness of the steel plate:60mm

6.Tee Max OD:Ф219mm*SCH40

contact function:

Darcy Dong

wahtsapp no/wechat:008615630731167

email id: guozhong_darcy@pipefittingsmachine.com