Malleable Iron Seamless Pipe Fittings Galvanized Pipe Thread Tee

By process

1. Hydraulic bulging

The hydraulic bulging of the tee is a forming process of compensating the bulging of branch pipe by the axial direction of metal material.The process is to use special hydraulic press, with three links within the tube billet diameter equal injection liquid, through the two horizontal side of the hydraulic cylinder synchronization of the motion of tube billet, billet after squeezed smaller volume, smaller volume of liquid with the tube billet inside the tube billet and pressure, when pressure tee branch pipe bulge out to the metal material in the liquid in the cylinder and the pipe pressure under the dual role of flow along the mold cavity and the branch pipe.

The hydraulic bulging process of the tee can be formed in one time with high production efficiency.The head and shoulder wall thickness of the tee are increased.

The tees are pipe fittings and pipe connectors.Also called pipe fitting tee or tee, tee joint, used in the main pipe to branch pipe.

The tee is divided into equal diameter and reducing diameter. The joint end of the tee is of the same size.The main pipe size of the reducing tee is the same, while the branch pipe size is smaller than that of the main pipe.

A tee is a pipe fitting for a pipe branch.For the use of seamless pipe manufacturing tees, the current commonly used technology is hydraulic bulging and hot forming two kinds.

contact:0086-18730795150

0317-8963758

Company name : Cangzhou Junxi International Trade Co., Ltd.