-70℃ To +150℃ Temperature And Humidity Test Chamber IEC62133 For Battery Test

Browse Categories

Electrical Appliance Testing Equipment(385)
Energy Efficiency Lab(45)
Vehicle Testing Equipment(139)
Battery Testing Equipment(75)
Switch Life Tester(277)
Led Testing Equipment(74)
Water Ingress Testing Equipment(85)
Environmental Test Chamber(110)
Flammability Test Chamber(60)
MCB Testing Machine(24)
Medical Device Testing Equipment(34)
IEC 62368 Test Equipment(74)
Test Equipment For Electric Lab(22)

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86-020-39185976

Contact Person:
Ms.Zoe Zou View Contact Details

-70℃ To +150℃ Temperature And Humidity Test Chamber IEC62133 For Battery Test

Brand Name	Sinuo
Model Number	SN559-1000L
Certification	Calibration Certificate(Cost Additional )
Place of Origin	China
Minimum Order Quantity	1
Price	Customized
Payment Terms	T/T
Supply Ability	10 sets per month
Delivery Time	30 Days
Packaging Details	Plywood Case
Temperature Range	-70℃ to +150℃
Temperature Fluctuation	±0.5℃
Humidity Range	(20～98)% RH
Humidity Fluctuation	≤2.5%
Heating Rate	-70℃ to +150℃ ≥5℃/min
Cooling Rate	+150℃ to -70℃ ≥5℃/min

Detailed Product Description

-70℃ to +150℃ Temperature and Humidity Test Chamber IEC62133 For Battery Test

Product information:

The Temperature and Humidity Test Chamber designed for reliability testing of electronics, electrical components, plastics, and other materials. It complies with international standards such as IEC62133, UN38.3, and IEC60068-2-2:2007. With a temperature range of -70°C to +150°C and humidity control from 20% to 98% RH, it ensures precise simulation of extreme environmental conditions for product validation.

Technical parameters:

Product Model	SN559-1000L
Nominal Volume	1000L
Internal Dimensions	W1000H1000D1000mm
External Dimensions	W1280H2150D2050MM
Weight	Approximately 580KG
Test Environmental Conditions	Ambient temperature: +25℃, relative humidity ≤ 85%, no samples inside the chamber
Temperature Range	-70℃ to +150℃
Humidity Range	(20～98)% RH (Temperature: 20℃～85℃, refer to the temperature-humidity control range chart, without active heat load)
Temperature Fluctuation	±0.5℃
Humidity Fluctuation	≤2.5%
Temperature Deviation	≤±2.0℃
Humidity Deviation	≤±3%
Heating Rate	-70℃ to +150℃ ≥5℃/min (Average over the entire range)
Cooling Rate	+150℃ to -70℃ ≥5℃/min (Average over the entire range)
Load Condition	None
Operating Noise	A-weighted sound level ≤70 dB(A) (Measurement taken in a soundproof room with minimal echo at an ambient temperature of 25℃. Using A-weighting, the average value is measured at 9 points. Each test point is 1 meter horizontally from the noise source and 1 meter above the ground.)
Structural Features
Thermal Insulation Structure	1.Outer wall material: A3 steel plate with spray coating. 2.Inner wall material: Brushed stainless steel plate SUS#304. 3.Thermal insulation material for the box body: 100mm high-temperature-resistant rigid polyurethane foam. 4.Thermal insulation material for the door: 100mm high-temperature-resistant rigid polyurethane foam.
Bottom Structural Strength	The bottom of the test chamber is designed with track load-bearing capacity: ≤100kg/m² (load).
Air Conditioning Channel	1.Stainless steel long-shaft centrifugal fan: 2 units, 90W. 2. Fan, heater, evaporator (also dehumidifier), drainage device, pressure balance port, adjustable air guide plate, temperature sensor.
Standard Configuration of the Test Chamber	1.Window: 400x600x40mm, 3 layers of vacuum tempered glass. 2.Embedded flat handle. 3.Door hinge: SUS #304 imported hinge. 4.Internal energy-saving light: LED energy-saving light. 5.Lead hole: φ50mm, 1 unit, located on the right side.
Door	1.Single door, opens outward, hinge on the left, handle on the right (when facing the front of the chamber). 2.Equipped with a safety door lock mechanism (the door can be opened from inside the test chamber). The door is equipped with electric anti-condensation heating, and the hollow glass observation window has a viewing area of approximately (W400×H600mm). The door frame is equipped with anti-condensation electric heating.
Control Panel	Controller with 7-inch display, temperature (humidity) control display, operation indicator light, and lighting button.
Mechanical Room	Refrigeration unit, compressor water tray, pressure relief device, heating device.
Power Distribution Cabinet	Power distribution board, cooling fan, main power switch, transformer, intermediate relay, time relay, solid-state relay, AC contactor, circuit breaker.
Heater	1.High-quality custom heating wire set. 2.Heating control mode: SSR (solid-state relay), non-contact periodic pulse width modulation. 3.Heating power: approximately 4KW.
Power Line Hole	Located on the back of the chamber.

Product Tags: IEC62133 Temperature Humidity Test Chamber Battery Test Temperature Humidity Test Chamber 150℃ Temperature Humidity Test Chamber

Related Products

High-Safety Battery Heavy Impact Test Machine Impact Weight 9.1KG UN38.3

UL 2054 Battery Heavy Impact Test Machine 9.1±0.1KG Impact Weight 1000mm Height

Hydraulic Vertical Shock Test System With Half-Sine Waveform Generator

EN 50604-1 Mechanical Shock Test System Impact Tests Of Half Sine Wave For Battery Cells

EN 50604-1 Battery Vibration Test System for Cell Pack Impact & Reliability Testing

Battery Mechanical Shock Test System Half-Sine Sawtooth Square Wave Shock Tests

Email to this supplier


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!