IEC60068-2-1 High And Low Temperature Rapid Change Test Chamber 150L

Browse Categories

Electrical Appliance Testing Equipment(472)
Energy Efficiency Lab(52)
Vehicle Testing Equipment(171)
Battery Testing Equipment(93)
Test Equipment For Electric Lab(23)
Switch Life Tester(310)
Led Testing Equipment(84)
Water Ingress Testing Equipment(103)
Environmental Test Chamber(125)
Flammability Test Chamber(67)
MCB Testing Machine(26)
Medical Device Testing Equipment(38)
IEC 62368 Test Equipment(76)

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86--13527656435

Contact Person:
Ms.Zoe Zou View Contact Details

IEC60068-2-1 High And Low Temperature Rapid Change Test Chamber 150L

Brand Name	Sinuo
Model Number	SN885-150L
Certification	Calibration Certificate(Cost Additional )
Place of Origin	China
Minimum Order Quantity	1
Price	Customized
Payment Terms	T/T
Supply Ability	10 sets per month
Delivery Time	45 Days
Packaging Details	Plywood Case
Temperature Range	-40℃ to +150℃
Temperature Fluctuation	≤±1.0℃
Temperature Deviation	±2.0℃
Temperature Uniformity	≤2.0℃
Internal Dimensions	W500×H600×D500mm
External Dimensions	W950×H1870×D1500mm
Volume	150L
Weight	Approximately 565kg

Detailed Product Description

High and low temperature rapid change test chamber

Product information:

This High and low temperature rapid change test chamber is designed and manufactured according to IEC60068-2-1, IEC60068-2-2, IEC60068-2-78 and IEC60068-2-30.
It is used to process cold, heat, humidity and dryness testing of raw materials and devices such as Parts and materials for electronic appliances, food, automobiles, rubber and plastic materials, metals and other products, such as optical fiber, LCD, crystal, inductor, PCB, battery, computer, mobile phone, rubber, plastic, etc. The purpose is to confirm the reliability of storage, transportation and use of products under high and low temperature rapid alternating humid heat environment.

Technical parameter:

Test Environment Conditions	· Ambient temperature: 5~35°C · Relative humidity: ≤85% RH · Air pressure: (86~106) kPa
Testing Method	Temperature test equipment Wet heat test equipment (for wet heat type only)
Temperature Range	-40℃~+150℃
Temperature Fluctuation	≤±1.0℃ (≤±0.5℃, as per GB/T5170-2008 specification)
Temperature Deviation	±2.0℃
Temperature Uniformity	≤2.0℃
Temperature Rise Time	-40°C to +150°C, linear rate ≥ 15°C/min (no load)
Temperature Drop Time	+150°C to -40°C, linear rate ≥ 15°C/min (no load)
Controller Model	7-inch
Operating Mode	Program mode, fixed value mode
Setting Method	English menu, touch input
Setting Range	Temperature: Adjusted according to the device's operating temperature range (Upper limit +5℃, Lower limit -5℃)
Display Resolution	· Temperature: 0.01℃ · Time: 0.01 minutes
Input	PT100 thermistor (platinum resistance/voltage/current, etc., as required by the device)
Control Method	Temperature uses anti-integral-saturation PID with auto-tuning function

Structural Systems:

Insulation Enclosure Structure	Outer Wall Material: 1.2mm double-sided electrolytic plate, surface spray-painted Inner Wall Material: 1.0mm stainless steel plate SUS304 Box Insulation Material: Rigid polyurethane foam + rock wool Door Insulation Material: Rock wool
Air Regulation Channel	Axial Flow Fans: 2 unitsHeaters, Evaporator (also functions as dehumidifier),Water Drainage and Supply Ports,Dry Bulb,Temperature Sensor For Wet Heat Type: Includes humidifier, dry-burn protection, wet bulb temperature sensor
Standard Configuration of Test Chamber	Observation Window: Transparent electric heat film, double-glazed tempered glass (1 unit, located on the door) Visible Area: W430mm × H550mm (including lighting and obstruction areas, as shown in the device outline diagram) Lead Hole: φ50mm (1 unit on each side of the box) Sample Rack: Stainless steel, 2-tier, load capacity (evenly distributed): 20kg per tier Lighting: 7W/DC24V (1 unit) Mobile Casters: 4 units
Door	Single-opening Hinged Door: Left hinge, right handle Includes Observation Window, Lighting, and Defogging Heater for Window/Frame
Control Panel	Temperature control display screen Over-temperature protection setting device Emergency stop switch Operation indicator light Fault indicator light Buzzer
Mechanical Room	Includes: Refrigeration unit, drainage system, fan, power distribution control cabinet,Humidification and humidity measurement control devices
Power Distribution Control Cabinet	Cooling fan Power distribution board RS-485 physical interface Main power circuit breaker
Heaters	Material: 316 stainless steel armored heating element Control Method: Non-contact pulse width modulation, SSR (Solid-State Relay)

Product Tags: Low Temperature Rapid Change Test Chamber 150L Rapid Change Test Chamber IEC60068-2-1 Rapid Change Test Chamber

Related Products

IEC 60068-2-52 270L Salt Spray Test Chamber For Corrosion Resistance Testing Environmental Tester for sale


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

IEC60068-2-1 High And Low Temperature Rapid Change Test Chamber 150L

IEC60068-2-1 High And Low Temperature Rapid Change Test Chamber 150L

IEC 60068-2-52 270L Salt Spray Test Chamber For Corrosion Resistance Testing Environmental Tester

UV-A / UV-B Chamber Type Accelerated Weathering Test Chamber For Materials

IP5X IP6X Sand And Dust Test Chamber 1000L With PLC Control Figure IEC 60529

IP5X & IP6X Sand Dust Test Chamber For Enclosure Sealing Performance Test IEC 60529

IEC 60529 Fig 2 IP5X And IP6X Sand And Dust Test Chamber 2000L PLC Control

IEC 60068-2-11 Salt Spray Corrosion Test Chambers 108L Corrosion-resistant Construction