High-Performance Thermal Shock Test Chamber -40℃ To 150℃ Range IEC60068-2

Browse Categories

Electrical Appliance Testing Equipment(385)
Energy Efficiency Lab(45)
Vehicle Testing Equipment(139)
Battery Testing Equipment(75)
Switch Life Tester(277)
Led Testing Equipment(74)
Water Ingress Testing Equipment(85)
Environmental Test Chamber(110)
Flammability Test Chamber(60)
MCB Testing Machine(24)
Medical Device Testing Equipment(34)
IEC 62368 Test Equipment(74)
Test Equipment For Electric Lab(22)

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86-020-39185976

Contact Person:
Ms.Zoe Zou View Contact Details

High-Performance Thermal Shock Test Chamber -40℃ To 150℃ Range IEC60068-2

Brand Name	Sinuo
Model Number	SN887B-100L
Certification	Calibration Certificate(Cost Additional )
Place of Origin	China
Minimum Order Quantity	1
Price	Customized
Payment Terms	T/T
Supply Ability	10 sets per month
Delivery Time	30 Days
Packaging Details	Plywood Case
High-Temperature Range	+60℃ ~ +180℃
Low-Temperature Range	-10℃ ~ -70℃
Temperature Fluctuation	±0.5℃
Temperature Deviation	±2.0℃
Internal Dimensions	W500H500mmD400mm
External Dimensions	W1420mmH1888mmD1590mm
Product Volume	100L
Product Weight	Approximately 1200kg

Detailed Product Description

High-Performance Thermal Shock Test Chamber -40℃ To 150℃ Range IEC60068-2

Product information:

This thermal shock test chamber meets the requirements of IEC60068-2-1, IEC60068-2-2, IEC60068-2-30 and IEC60068-2-78, and required by many standards.
It is used to verify whether there is a bad influence on the product due to rapid changes in high and low temperature in such a manner that the sample does not move.

Technical parameter:

Product Name	Thermal Shock Test Chamber
Product Model	SN887B-100L
Volume	100L
Internal Dimensions	W500H500mmD400mm
External Dimensions	W1420mmH1888mmD1590mm
Weight	Approximately 1200kg
High-Temperature Range	+60℃ ~ +180℃
Heating Time	+20℃ ~ +180℃ ≤ 25 min Note: The heating time refers to the performance when the high-temperature chamber operates independently.
Low-Temperature Range	-10℃ ~ -70℃
Cooling Time	+20℃ ~ -70℃ ≤ 60 min Note: The cooling time refers to the performance when the low-temperature chamber operates independently.
Temperature Shock Range	-40℃~150℃
Temperature Fluctuation	±0.5℃
Temperature Deviation	±2.0℃
Temperature Recovery Time	≤5min
Temperature Transition Time	≤10sec
Recovery Conditions	High-temperature exposure: +85℃ / 30 min → Ambient temperature exposure → Low-temperature exposure: -40℃ / 30 min Maximum Sample Weight: 20 KG

Structural Features:

Standard Configuration of the Test Chamber	Flush-mounted handle. Door Hinges: Imported SUS #304 stainless steel hinges. Shelves: Two SUS #304 stainless steel grille-type shelves, with a maximum load of 20KG per layer. Adjustable Shelf Tracks: Two sets with 40mm adjustable spacing. Lead-through Port: One φ50mm port at the top of the chamber.
Chamber Door	Single Door: Opens outward, hinges on the left, handle on the right (when facing the front of the chamber). Equipped with an observation window (W300 x H450mm) made of anti-fog tempered glass and Philips lighting. Anti-condensation Heating Device: For window and door frames. Additional Tempered Glass: Allows clear observation of tests inside the chamber.
Control Panel	7-inch display screen, over-temperature protection settings, SD card slot, and RS232 communication interface.
Mechanical Room	Refrigeration unit, compressor water tray, and pressure relief device.
Power Distribution Control Cabinet	Power distribution board, cooling fan, and main power switch.
Heater	Type: Finned tubular stainless steel electric heater. Heating Control Method: SSR (Solid State Relay) with zero-crossing point and periodic pulse width modulation. Heating Power for Low-Temperature Zone: Approximately 6KW. Heating Power for High-Temperature Zone: Approximately 9KW.
Power Cable Port and Drain Port	Located at the back of the chamber.
Electrical Controller Model	Custom seven-inch controller.
Operating Model	Programmable operation / Chinese and English menu, touchscreen input.
Setting Range	High-temperature chamber preheating upper limit: +210℃ Low-temperature chamber pre-cooling lower limit: -80℃
Controller Specifications	Accuracy: Temperature ±0.1℃ + 1 digit Resolution: Temperature ±0.01℃ Temperature slope: 0.1 ~ 9.9 (adjustable). Includes upper and lower limit standby and alarm functions. Temperature input signal: T-type armored thermocouple sensor. 6 sets of P.I.D. control parameters with automatic P.I.D. calculation

Product Tags: IEC60068-2 Thermal Shock Test Chamber High Performance Thermal Shock Test Chamber Thermal Shock Test Chamber

Related Products

IEC 60950 Heating Cabinet for Electronics Safety Testing 225L Temperature RT+10°C ~300°C

Explosion-proof Walk-In High and Low Temperature Humidity Test Chamber 8.36m³

IEC 60068-2-78 Walk-in Temperature and Humidity Test Chamber 3.38m³ Temp. -40~+100℃

ISO 4892-1/2 Water-Cooled Xenon Weathering Test Chamber Irradiance Range 0.3W/M2～1.1 W/M2

IEC 60068-2-11 1M3 Compound Salt Corrosion Test Chamber Spray Pressure 70～170Kpa

80L Air-Cooled Thermal Shock Test Chamber -40°C To +150°C Test Range

Email to this supplier


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!