IEC 60335-2-36 Mechanical Durability Test Device For Commercial Induction Cookers

IEC 60335-2-36 Mechanical Durability Test Device For Commercial Induction Cookers

Product information:

The test equipment conforms to the standard requirements of IEC60335-2-36 clause 18.101.

The equipment is used to verify the equipment equipped with induction heating source. The structure should be able to guarantee 100,000 times of normal use without failure that may weaken the requirements of this part. The insulation should not be damaged and the connections should not be loose. The mechanical durability and reliability performance should be tested.

Test principle: The motor drives the mechanical arm to drive pans or equivalent metal objects up and down the induction cooker at a certain speed. At the same time, the induction cooker is turned on and off to simulate its normal use for 10,000 times of life test, and the load voltage is adjustable.

Structure: The equipment consists of an electrical control cabinet (including a load voltage regulator), a rack, and a mechanical arm mounted on the equipment.

Device dimensions: Approximately: 1100×1100×1300 (mm) W×D×H

Device weight: Approximately 150kg

Technical parameters: