IEC 62133 Battery Explosion-Proof Test Chamber 864L Battery Testing Equipment 0℃~85℃

W 900×H 800×D 1200mm, internal volume 864L

Meets battery testing requirements

Video surveillance

The test area is equipped with a high-definition video surveillance system and can be remotely controlled;

Color video;

Pixels ≥ 5 million pixels;

Video acquisition resolution: PAL: D1 (704x576) / CIF (352x288) /

QCIF (176x144), and multimedia format (320x240);

Horizontal clarity: 700TVL;

Recording and playback speed: 25 frames/second per video channel (PAL);

Video memory adds a mobile hard disk, and the video surveillance system is compatible with the mobile hard disk for storage to ensure data accuracy.

(If the surveillance system needs to be set up in an explosion area, the surveillance system needs to have explosion-proof function, and the camera can still monitor clear images after the explosion, which will not affect the next use) (optional)

Equipment inner box

Made of 2mm SUS304 stainless steel + 3mm cold-rolled steel plate, with external welded reinforcement ribs to ensure the strength of the inner box. Prevent the impact of battery explosion from damaging the box. Adopts TIG continuous welding; has acid-proof, explosion-proof and corrosion-proof functions; C5 channel steel is welded on the outside of the box for reinforcement;

Three sets of high-strength stainless steel hinges are installed on the left and right sides of the door. A single hinge can withstand 3 tons of force in transverse stretching without breaking. Even if it is bent in the opposite direction, the two hinge pieces are completely deformed and combined into one without breaking, ensuring the fixing strength of the left side of the door.

Explosion-proof design

1) The equipment is integrally formed, and the explosion-proof strength of the box body meets the explosion strength of two 230Ah battery cells. Effective explosion-proof pressure relief design is carried out. The steel plate material is treated with rust-proof insulation and is effectively flame-retardant. Structural design drawings are provided. Explosion-proof chains are installed to prevent the box door from being opened.

2) Use 2mm thick SUS304 stainless steel inner wall + 3mm cold-rolled steel plate and 5# channel steel reinforcement. At the same time, add a pressure relief port (300*300mm). According to the finite element software analysis, under this yield pressure, it is calculated that the box + pressure relief port can withstand a force of ≥ 1.2bar under the condition of pressure relief. It meets the pressure generated by 230AH battery failure.

Explosion-proof chain

Install 2 explosion-proof chains (φ8mm) on each side of the gate (4 pieces in total) to prevent the gate from bouncing open and flying out under the impact of an explosion.