IEC60529 IPX1~2 Vertical Rain Drip Test System To Verify Water Drops

Browse Categories

Electrical Appliance Testing Equipment(385)
Energy Efficiency Lab(44)
Vehicle Testing Equipment(139)
Battery Testing Equipment(75)
Switch Life Tester(277)
Led Testing Equipment(74)
Water Ingress Testing Equipment(85)
Environmental Test Chamber(110)
Flammability Test Chamber(60)
MCB Testing Machine(24)
Medical Device Testing Equipment(34)
IEC 62368 Test Equipment(73)
Test Equipment For Electric Lab(22)

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86-020-39185976

Contact Person:
Ms.Zoe Zou View Contact Details

IEC60529 IPX1~2 Vertical Rain Drip Test System To Verify Water Drops

Brand Name	Sinuo
Model Number	SN442
Certification	Calibration Certificate (Cost Additional)
Place of Origin	China
Minimum Order Quantity	1
Price	Customized
Payment Terms	T/T
Supply Ability	10 Sets Per Month
Delivery Time	30 Days
Packaging Details	Plywood Case
Power supply	Three phase AC380V, 50Hz, 4KW
LWGYD-4 flow rate Sensors	Flow range: 0.667-4.167 L/min, pulse output
Drip area	1000*1000mm
Diameter of drip hole	0.4mm
Test flow	1~1.5mm/min(IPX1), 3~3.5mm/min(IPX2)
Water dripping height	200mm (automatically controlled by the test equipment)
Control	PLC & 7” touch screen
Turntable	1-5r/ min, can be set

Detailed Product Description

IEC60529 IPX1~2 Vertical Rain Drip Test System To Verify Water Drops

Product Information For IPX1 IIPX1~2 Vertical Rain Drip Test System:

This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requirement of IEC60529 IPX1 and IPX2, IEC60335-1 clause 15.etc.

The rise and fall of the drip box is controlled by the motor. The electrical control cabinet is with PLC and touch screen.

1. Stainless steel fine filter for dirt filtration.

2. Adopts compressed air (compressed air should be prepared by user) to blow out the water in the needles, to prevent water reactive substances and atmospheric blocking needles.

3. Stainless steel general medical needle nozzles, easy to buy, not easy to rust.

4. Needle nozzles and needle nozzle seats using taper connection, can be easily replaced without the tool, individual damage to the needle nozzle can be easily replaced quickly.

Technical Parameters :

Item	Specifications
Power supply of this equipment	Three phase AC380V, 50Hz, 4KW
Power supply for test sample	Single phase AC220V, 16A
LWGYD-4 flow rate Sensors	Flow range: 0.667-4.167 L/min, pulse output
Small water pump	Brand: South, model no.: CHL2-40, 380VAC, 50Hz, 0.55kw Protection class: IP55 Insulation class: F
Waterproof test range	IPX1 test, IPX2 test, IPX1/IPX2 custom
IPX1-IPX2	Drip area: 1000*1000mm
	Diameter of drip hole: 0.4mm
	Distance between each two neighbor holes:20mm
	Test flow:1~1.5mm/min(IPX1), 3~3.5mm/min(IPX2)
Test time	Set according to the test standard (range 1-9999 seconds), the unit is: second
Water dripping height	200mm (automatically controlled by the test equipment)
Water Drainage	Automatically emptying the tank water after the test is completed, should connected with an air source (the 0.6MPa compressed air source should be prepared by user)
Equipment body material	Industrial aluminum alloy
Installation method	Wall Mount
Turntable	1-5r/ min, can be set
Control	PLC & 7” touch screen

Troubleshooting:

No.:	Failure phenomenon	Reason of issue	Treatment
1	Turn on the power switch and the touch screen does not light up	External power supply fails	Reconnect external power supply
1		Equipment MCB is disconnected	Turn on the equipment MCB
2	No action when the start button is pressed	The run time is not cleared	Press Count Clear
		The emergency stop switch is not reset	Reset the emergency stop switch
		Inverter alarm	Restart after power off
3	Little or no water from the needles	Needles are clogged	Replace the needle or remove the needle and blow through the needle hole with airflow
4	Unstable flow	Air in the pipeline	Press “Dry Drip Box” in the Manual control interface to exhaust the air, or open the vent of the water pump to exhaust the air

Product Tags: IPX1 Vertical Rain Drip Test System Vertical Rain Drip Test System IEC60529 Rain Drip Test System

Related Products


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

IEC60529 IPX1~2 Vertical Rain Drip Test System To Verify Water Drops

IEC60529 IPX1~2 Vertical Rain Drip Test System To Verify Water Drops

IPX5 IPX6 Water Jet Test System For Waterproof Rating IEC 60529

IEC 60068-2-68 Sand And Dust Test Chamber For Automotive & Electronic IP Protection Testing

IEC 60529 All in One Integrated Waterproof Test Chamber for IPX1~IPX6 Tests 1000L

Open-Type IPX9K High Pressure Water Resistance Test System Ingress Protection Testing

4 In 1 Integrated IPX3 To IPX6 Waterproof Test Chamber IEC 60529 Figure 4 And Figure 6

DO-160G Civil Aviation Electronics Anti-Drip Test Equipment For Avionics Class W Test