IEC60529: 2013 IPX7 Immersion Test Chamber With Electric Lifting
Control Cabinet
Product Overview For IPX7 Immersion Test Chamber:
The IPX7 immersion test chamber is designed and manufactured in
accordance with the requirements of IEC 60529:2013. Used for
testing the IPX7 waterproof level of electrical and electronic
products.
The complete set of IPX7 immersion test chamber is composed of
water tank, electric lifting basket and control cabinet.
Technical parameters For IPX7 Immersion Test Chamber:
| Chamber external size | Approximately W 1080* D 1080*H 2300mm (including casters) |
| Chamber inner size | Length 1000* W 1000* H1800mm |
| Max. test water depth | 1.8m |
| Observation window | Tempered glass (thickness: 12mm) |
| Observation window width | 200mm |
| Water level adjustment method | Water inlet / drain valve, manual adjustment |
| Water level display | Scale (accuracy 1mm) |
| External chamber material | Stainless steel plates + Aluminum profile frame |
| Inner chamber material | 2.0mm thickness stainless steel |
| Electric lifting basket | Made of stainless steel, controlled by electric hoist |
| Control method | Buttons (non-PLC) |
| Test time | 0.01 second-99.99hours can be preset |
| Immersion depth requirements | The lowest point of enclosure with a height less than 850 mm is
located 1000mm below the surface of the water
The highest point of enclosure with a height equal to or greater
than 850mm is located 150mm below the surface of the water |
| Test content | IPX7 |
| Power supply | AC 220V,50Hz, 1KW |
Common Troubleshooting For IPX7 Immersion Test Chamber:
| No.: | Failure phenomenon | The cause of the failure | Approach |
| 1 | Equipment is powered on, but timer does not show any value | External power supply fails | Reconnect power supply |
| Power control breaker is off | Turn on the breaker in the control box |
| 2 | No action when the start button is pressed | The test time is not cleared | Press “Stop/Clear” to clear time |
