Cookerwares Coating Scratch Resistance Testing Equipment BS EN 12983-1
|
|
BS EN 12983-1 Scratch Resistance Tester For Testing Cookware Scratch Resistance
Structure for Scratch Resistance Tester:
The device uses the pencil nib to compare the scratch resistance of the coating; Apply 4&8N pressure to the pencil; Insert the pen core into the hole where the hole is 45°, then the pencil nib completely touches the bottom coating of the pot, and then draw a 2~5cm line on the coating; Judge the effect by the li:202nes drawn.
Standards for Scratch Resistance Tester:
BS EN 12983-1: 2020 clause 8.4.2, 8.4.3 and Appendix K.
Main specificationsfor Scratch Resistance Tester:
Heating platform DB-2EFS:
Operations steps: 1 Put the heating platform on the equipment, and power on it by
inset it’s plug to the socket on the equipment. 2 Put the sample cookware on the heating platform. 3 Put the sharpened pencil into the fixture with an included angle
of 45°, with the sharpened end facing the surface of the cookware,
and tighten the screw to fix the pencil. 4 Select the load according to the requirements, 4N is shown in the
left figure below, and a load accessory is added to make 8N. 5 Power on the equipment, select the test according to your requirements. Ambient temperature test: Test at room temperature, select 8N load; High temperature test: Turn on the power of the heating platform to start heating, set the temperature of the heating platform (standard requirement is 200℃), and select 4N load. Note: During the high temperature test, when the temperature display of the heating platform reaches the set value, press the start button to start scraping, and observe whether the speedometer under the panel is the speed required for the test. If not, you can adjust the speed controller on the panel. 6 Set test times. 7 After the test is completed, check whether the cookware meets the requirements according to the standard.
Maintenance: 1 Before working, please check whether the fasteners are loose, and make sure that the loose fasteners are locked. 2 Do not touch the surface of the heating platform when heating to prevent burns. 3 Please remove the weight when it is not working. 4 Please cut off the power when not working.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: BS EN 12983-1 Scratch Resistance Tester Cookers Scratch Resistance Tester | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
IEC 62196 Computer Controlled Overvoltage Test System For Electric Vehicle Accessories |
|
IEC60335-1 Vacuum Cleaner Hoses Current-Carrying Hoses Flexing Test Device 5 Station |
|
BS1363-2 Temperature Rise Test System With Dummy Front Plate Max. 45A |
|
6-100KN Box Compression Tester For Carton Packaging Compressive Strength Testing |
|
Compression Testing Machine With 100KN For Compressive Strength Of Carton Packaging |
|
IEC 60884 2022 Cord Retention Testing Apparatus For The Effectiveness Of Cable |