IEC 62368-1 Annex T10 Centre Punch For Glass Fragmantation Test
|
Detailed Product Description
|
IEC 62368-1 Annex T10 Centre Punch for Glass Fragmantation Test
Product Information: The Centre Punch conforms to the standard requirements of IEC 62368-1:2018 Annex T10, IEC 60598-2-3 clause3.6.5, IEC 60335-2-6:22.120, IEC 60335-2-25:22.119; IEC 60335-2-89:22.104 and etc. It is used to test accessible glass panels of household appliances, electrical accessories, lamps, etc. The test sample is supported over its whole area and precautions shall be taken to ensure that particles will not be scattered upon fragmentation.
Technical Parameters:
Test Process: The sample under test is broken by means of a test punch having a
head with a mass of 75 g ±5 g and a conical tungsten carbide tip
with an angle of 60°±2°. The punch shall be positioned
approximately 13 mm in from the longest edge of the glass at the
midpoint of that edge. The punch is them hit by a hammer so
that the glass breaks.
|
||||||||||||
| Product Tags: Annex T10 Centre Punch IEC 62368-1 Centre Punch Glass Fragmantation Test Centre Punch |
Related Products
|
Intelligent Compressive Strength Testing Machine Packaging Testing Equipment IEC 62368-1 |
|
Tensile Strength Test Apparatus For Measure Mechanical Properties Of Material IEC 62368-1 |
|
ASTMD 1525 Vicat Softening Temperature Of Determination Thermal Testing Equipment |
|
IEC 62368-1 Clause 5.4.1.10 Vicat Softening Temperature Determination Tester |
|
IEC 62368-1 Clause Y.4.3 Tensile Strength And Elongation Test Apparatus |
|
Clause Y.5 IPX3 To IPX6 Water Spray Test Apparatus IEC 62368-1 |
Email to this supplier