China Electrical Appliance Testing Equipment manufacturer
Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
7
Home > Products > Water Ingress Testing Equipment >

IEC 60529 IPX3~4 Oscillating Tubes Water Spraying Testing Equipment

IEC 60529 IPX3~4 Oscillating Tubes Water Spraying Testing Equipment

Brand Name Sinuo
Model Number SN444
Certification Calibration Certificate (Cost Additional)
Place of Origin China
Minimum Order Quantity 1
Price Customized
Payment Terms L/C, T/T, Western Union, MoneyGram
Supply Ability 10 Sets Per Month
Delivery Time 30 Days
Packaging Details Plywood
Applied Standard IEC60529-2013
Control And Operation PLC and touch screen
Oscillating Tubes R200~R1600mm full set
IPX3 Swing Speed 4s/time (2*±60°)
IPX4 Swing Speed 12s/time (2*±180°)
IP Code IPX3, IPX4
Needle Hole Φ0.4mm
Turntable Diameter Φ600 mm
Detailed Product Description

 

IEC 60529 IPX3~4 Oscillating Tubes Water Spraying Testing Equipment

 

Product introduction

IPX3~4 oscillating tubes test system is designed and manufactured according to IEC60529:2013. It is used for testing the IPX3/IPX4 waterproof level of electrical and electronic products.

The complete set of IPX3~4 oscillating tubes test system is composed of one set of oscillating tubes swing device, one set of oscillating tubes (R200-R1600mm), a turntable, and an intelligent water supply and control cabinet.

The intelligent water supply and control cabinet is composed of a water supply tank, a water pump, and a control system. The test water supply flow is controlled by PLC, frequency converter, and turbine flow sensor. The test flow rates according to the standard requirements have been default in the control system, as long as the operator selects the waterproof test level on the touch screen, the test can be performed. And the test flow rates can also be set by operator.

 

Technical Parameters:

 

No.ItemParameters
1LWGYD-4 flow rate SensorsFlow range: 0.667-4.167 L/min, pulse output
2Small water pump

Brand: South, model no.: CHL2-40, 380VAC, 50Hz, 0.55kw

Protection class: IP55 Insulation class: F

3Radius of the oscillating tubesComing with R200, R400, R600 R800, R1000, R1200, R1400, R1600mm oscillating tubes, made of stainless steel
4Inner diameter of oscillating tubesΦ18mm
5Needle holeInside diameter: Φ0.4mm, distance between each two neighbor holes is 50mm, flow of each hole is 0.07±0.0035 L/Min
6Included angle of two holesIPX3:120°; IPX4:180°
7Oscillating tube swing angle

0~350° (max. ±175°) can be preset

(Note: standard requires IPX3:120°; IPX4:360°, but due to there is turntable under oscillating tube during test, so 360° can not achieved during actual testing, if without turntable, then 360° can be achieved)

8Oscillating tube swing speed

IPX3:4s/time (2*±60°);

IPX4:12s/time (2*±180°)

9Test flowCan be set according to the size of the oscillating and the number of the pin holes (0.07 L/minX per hole) as per standard requirements of IEC 60529
10Test time1-9999S can be preset, set test time according to standard requirements of IEC 60529
11Turntable speed1-5r/ min, can be set
11Site requirements

Dedicated IP waterproof test room, the ground should be flat with illumination.

With good function of inflow and drainage.

Ground installation.

12Electrical controlPLC & touch screen
13Power supply for this equipmentThree phase AC 380V, 50Hz, 4KW
14Power supply for sampleAC220V, 16A
 

 

 
Product Tags: Oscillating Tubes Water Spraying Testing Equipment   IEC 60529 Water Spraying Testing Equipment   IPX3 Water Spraying Testing Equipment  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: Sinuo Testing Equipment Co. , Limited
Subject:
Message:
Characters Remaining: (80/3000)