Camera Lens Rotating Torque Testing Equipment PLC Control 0.2N.M
|
|
Camera Lens Rotating Torque Testing Equipment
Product overview:
The testing machine is designed and manufactured strictly according to customer's specific requirements. It is driven by Panasonic servo motor, equipped with Mitsubishi PLC, 7-inch touch screen. It is a dedicated high-end torque test equipment with threaded lens sleeve.
This testing machine is mainly used to verify the thread torsion strength of the lens with a threaded lens sleeve, and verify its fatigue resistance after a certain number of rotation.
Working principle:
Use a servo motor to drive the fixture holding the lens to rotate a certain number of times N (N=thread length*10/thread pitch) at a speed of not less than 20 times/min, and insert it into the corresponding threaded sleeve. The cylinder can bear a torque greater than 1.2kgf*cm through a combination of fixed pulleys and weights.
Technical Parameters:
Equipment structure: 1. The sleeve end is matched with the spline sliding sleeve shaft to ensure that the axial direction can move freely, matching the screw-in and screw-out position of the screw. 2. Lens fixture: For the clamping outer circle without card slot, the clamping point width is 1mm; for the lens with card slot, insert it directly into the card slot. Fixture hardness≥HRC28, smooth finish is higher than Ra3.2.
|
||||||||||||||||||||||||||||||||||||
| Product Tags: PLC Torque Testing Equipment 0.2N.M Torque Testing Equipment |
|
IEC 60335-2-24 Steel Ball Impact Test Apparatus for Enclosure Drop Impact Testing |
|
IEC 60335-1 Temperature Rise Test Corner Chamber for Electrical Appliance Testing |
|
TZS 683/2022 Cookware Handle Fatigue And Strength Test Apparatus Cookware Testing Machine |
|
EN 12983-1 Cookware Handle Fatigue And Strength Test Machine For Kitchen Handle Strength Test |
|
IEC60695-11-5 Needle-flame Test Method Fire Hazard Testing Apparatus |
|
IEC 62196 Computer Controlled Overvoltage Test System For Electric Vehicle Accessories |