IEC60335-1 20MPa 450ml Ceramic Material Fuchsine And Methylated Spirit Pressure Test Apparatus
|
|
Ceramic Material Fuchsine and Methylated Spirit Pressure Test Apparatus
Standards & Clauses:
IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 22.32
Samples and Restrictions:
Ceramic Material of electrical appliaces
Application:
It is use to determine if ceramic material is tightly sintered, consists of two parts: test container and pressure boosting device magenta.
Test Principle:
The ceramic material is broken into pieces that are immersed in a solution containing 1 g of fuchsine in each 100 g of methylated spirit. The solution is maintained at a pressure not less than 15 MPa for a period so that the product of the test duration in hours and the test pressure in megapascals is approximately 180. The pieces are removed from the solution, rinsed, dried and broken into smaller pieces. The freshly broken surfaces are examined and shall not show any trace of dye visible to the naked eye.
Technical Parameters:
Put the ceramic samples into a container bottle shown as above with
magenta solution
|
||||||||||||||||||
| Product Tags: ac hipot test equipment glow wire test equipment |
|
IEC 62196 Computer Controlled Overvoltage Test System For Electric Vehicle Accessories |
|
IEC 62262 IK Code High Energy Pendulum Hammer Impact Test Apparatus |
|
Screwless Terminal Clamping Capacity Test Apparatus IEC 60884-1 Clause 12.3.11 |
|
IEC 60065 Φ800mm Steel Inclined Plane Button-Controlled Mechanical Stability Test Bench |
|
IEC60335-1 Vacuum Cleaner Hoses Current-Carrying Hoses Flexing Test Device 5 Station |
|
IEC 60335 Toaster Test System 500 Automatic Cycles for Appliance Safety & Reliability |