IEC62133 Battery Testing Equipment 20000 m/s2 Mechanical Acceleration Shock Crash Hazard Test

Browse Categories

Electrical Appliance Testing Equipment(472)
Energy Efficiency Lab(52)
Vehicle Testing Equipment(171)
Battery Testing Equipment(93)
Test Equipment For Electric Lab(23)
Switch Life Tester(310)
Led Testing Equipment(84)
Water Ingress Testing Equipment(103)
Environmental Test Chamber(125)
Flammability Test Chamber(67)
MCB Testing Machine(26)
Medical Device Testing Equipment(38)
IEC 62368 Test Equipment(76)

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86--13527656435

Contact Person:
Ms.Zoe Zou View Contact Details

IEC62133 Battery Testing Equipment 20000 m/s2 Mechanical Acceleration Shock Crash Hazard Test

Brand Name	Sinuo
Model Number	SN558
Certification	Calibration Certificate (Cost Additional)
Place of Origin	China
Minimum Order Quantity	1
Price	Customized
Payment Terms	L/C, T/T, Western Union, MoneyGram
Supply Ability	20 Sets Per Month
Delivery Time	1 Month
Packaging Details	Plywood
Pulse Wave	Half sinusoidal wave
Peak Acceleration	150～20000m/s2
Pulse Duration Time	0.6～20ms
Max. Shock Frequency	80 times/min
Max. Shock Height	1500mm
Max. Loading Capacity	10kg

Detailed Product Description

IEC62133 Batteries Cells 20000 m/s2 Mechanical Acceleration Shock Crash Hazard Testing System

Overview:

This fully automatic shock test system is designed for measuring and ensure shock performance of products and packages. It can do normal shock test with half sine wave, square wave, sawtooth wave etc., simulate products under real environment shock conditions, thus improve the products and packages structure.

Standards Compliant:

It conforms to IEC62133:2017 clause 7.3.4, IEC62133:2012 clause 7.3.4, IEC60086-4 clause 6.4.4, IEC 60068-2-29, YD/T 2344.1 and etc.

Feature:

1. This automatic shock test system with Windows operating system, easy for

operation, operator only need to type into testing data, system will automatic configurate

parameters and control machine, finish shock test accurately.

2. With anti-re-shock brake device, shock table fall freely, when shock wave pad rebound,

hydraulic brake piston impact thus shock table braking, avoid secondary shock and achieve accurate shock data.

3. With effective vibration damping device; for large shock tester, when do shock testing it has large instantaneous impact force, this device largely reduced the shock impact to the floor, small than 350×350mm ones no need special foundation, easy for installation.

4. Digital setting of shock height, shock table automatically lifting, with high control accuracy and good repetitively.

5. Configured with shock measuring system, shock energy data and wave with real time

display.

6. With high acceleration generator, for small testing specimens which need high

acceleration shock test, able to fix high acceleration generator on shock table, it can obtain

higher acceleration than IS series shock tester according to impact energy transfer principle. For specimen smaller than 200×200mm the testing requirements is: peak acceleration 5000-50000m/s2, acceleration duration time 0.2~1ms.

Shock Test System Main Technical Parameters:

Max. Loading Capacity	10kg (can be customized)
Bench Dimension	200mm×200mm (can be customized)
Pulse Wave	Half sinusoidal wave
Shock Peak Acceleration	Half sinusoidal wave:150～20000m/s2
Pulse Duration Time	Half sinusoidal wave: 0.6～20ms
Max. Shock Frequency	80 times/min
Max. Shock Height	1500mm
External Dimension	1000mm×500mm×2700mm
Power Consumption	2.5KVA
Bench Mass	1500kg
Power	AC 380V±10% 3 Phase, 60Hz
Anti-secondary shock advice	Hydraulic Friction Braking Device
Working Condition	Power: AC 380V±10% 3 Phase, 60Hz
	Environment Temp.: 5℃-40℃
	Relative Humidity: ≤90%(25℃)
	Surrounding Environment: No corrosion medium, dry, good ventilation, away from electromagnetic influence and strong vibration source.

Measuring Control System Main Technical Parameters:

Function& Features	This hydraulic shock impact test system has the special designed control and measuring system
	Adopt USB2.0interfaceconnect with PC, transfer control signal and measuring data.
	With power cut off protection function, bench lifting height limitation function and pre-shock alarm function, safety reliable.
	Base on DSP high quality dynamic measuring, analyzing and control system, shock impact control system also professional for shock pulse and analyzing. Consist of control system, measuring system and Windows based software, hardware adopts module and low noise design, realized the circuit of control and measuring functions all in the interface cabinet, and with independent structure combination (control cabinet and measuring cabinet separate). Use USB2.0 communication, independent from PC. Applied for normal shock and heavy shock environment shock event capture, measuring and analyzing. Complied with standard ISO,MIL-STD,IEC,OEO,ASTM etc.
Technical Parameters	Input channel
	Input channel	With1input electric input channel
	Sampling Frequency	Max 200k
	Voltage Range	-10Vp～+10Vp
	Coupling Mode	Electric Mode
	ADC Resolution	16 bites
	Pulse Width	0.5-1,000ms
	Acceleration	5000g
	Dynamic Range	80dB
	Total Harmonic Distortion	<-95dB
	Signal to Noise ratio	>95dB
	Frequency Accuracy	0.01%
	Standard Compliance	ISO, MIL-STD-810, or customized standards
	External Trigger	With
	Mechanical Parameters
	Dimension	242mm×220mm×96mm
	Weight	2.5kg
Adaptive Digital Filter	Filtration type	Lowpass and high pass filter can use simultaneously
	Filtration Features	Able to set different filter channel for each.
	Low pass filtering parameter	No filtration, cut-off frequency, filter ratio
	High pass filtering parameter	Do not filter cut-off frequency
Ideal Wave	Wave type	Half sinusoidal wave, trapezoidal wave, final peak saw tooth shock pulse
	Standard Compliance	ISO, MIL-STD-810, or customized standards
	Auto Calibration	Automatically add the capture wave to ideal wave
	Verification	Auto comparison difference of captured wave and setting wave
	Display	Display the consistence of captured wave and setting wave
Trigger	Trigger Source	Simulate input channel, external trigger, non-trigger
	Trigger	Double Edge
	Trigger Level	1~99%Of Relative ideal wave acceleration
	Running Mode	Manual running, auto running.
	Auto Noise Reducing	Optional function, setting noise reducing percentage trigger edge: double edge
Data Saving	Memory Device	Data recording, signal store, content can be customized according requirements
	Re-display	Manual replay shock wave
	Data Output	Direct output to Excel report
WORD Test Report	According users setting automatically create word report, report content and format user can customize
Running Records	Software auto record the running process
Software interface (Half sinusoidal wave diagram)
Final Peak Sawtooth wave (Optional)
Trapzoidal Wave Optional
Half sinusoidal wave generator	Half sinusoidal wave generator mainly made of industrial rubber (considering the rubber strength and polymerization). Wave generator adopt cylindrical, normally with different thickness, as picture shows. Different thicknesses combined, with multi strength, realize different shock pulse width.
Half sinusoidal wave generator

Product Tags: battery charge discharge test equipment high frequency vibration generator

Related Products

IEC 62133 Battery Explosion-Proof Constant Temp & Humi Test Chamber -40℃~150℃ for sale


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

IEC62133 Battery Testing Equipment 20000 m/s2 Mechanical Acceleration Shock Crash Hazard Test

IEC62133 Battery Testing Equipment 20000 m/s2 Mechanical Acceleration Shock Crash Hazard Test

IEC 62133 Battery Explosion-Proof Constant Temp & Humi Test Chamber -40℃~150℃

IEC 63370 Clause 19.10 Battery Pressure Test Chamber PLC-Controlled Safety Enclosure System

IEC 62133 Battery Explosion-Proof Test Chamber 864L Battery Testing Equipment 0℃~85℃

IEC 62133-1 Chemical Battery Enclosure Pressure Test System With PLC Control

IEC 60335-1 Battery Case Pressure Testing System For Chemical Battery With PLC Control

UL 1642 FIG. 20.1 Single Station Lithium Battery Fire Exposure Tester