High - Tech Security Alarm Device Photoelectric Dual Beam Motion Sensor

Item

Specification

Remark

Model

XA-030D

XA-060D

XA-080D

XA-100D

Detection Mode

Pulse Infrared

Range

30m

60m

80m

100m

Outdoor

Power Input

DC10 ~28V

Polar

Consumption Current

77mA Max.

85mA Max.

Transmitter and Receiver at DC 12V

Alignment Range

Vertical :±5degrees ,Horizontal :±90degrees

Transmitter and Receiver

Interruption Period

40msec/100msec/400msec/700msec

4 stage by DIP switch

Relay Output Action

Alarm

When beam is shaded(2 seconds Min)

Supply voltage drop alarm

When power supply voltage falls (2 seconds Min).

Relay Output

No voltage contact output
Output Rating :DC30V,0.3A (Resistor Load ) Select the contact a or b through the switch

Output located on the receiver

Alarm Action Indication

Alarm
Low supply voltage alarm

Red LED is on when alarming, and red LED is off when guarding
Red LED is off in the normal state, and red LED is on in the abnormal state

Located on the receiver can not display when power off on/off by DIP switch

Voltage Level Optical Alignment Alignment LED

Insert the voltmeter's probe into the receiver monitor jacks , and adjust for the Max. voltage.
Red LED Indicator ON, FLASH, and OFF is changed by received level.

Refer to the instruction to adjust.
Located on the transmitter ON/OFF by the switch

Tamper Output

Condition
Rating

N.C.open when receiver' cover is removed.
No-voltage contact output, DC 30V, 0.3A (resistive load)

Output from tamper terminal that located on the receiver.

Power Indicator

Green LED ON when a transmitter is powered.

located on the transmitter ON/OFF by the switch.

Operating Environment

Temperature: -25℃ ~ + 55℃; humidity: Rh.95% Max.

Dimensions

234mm×77mm×83mm

Cover:Black ,PC resin
Main Unit:Yellow,ABS resin

Weight

Transmitter::520g,Receiver:550g

Including mounting plate