jerry can 20L blow molding machine
Specification of the machine :
1,Double- Crank four-pull bar Colsing Molding, Balance of fixed sliding
2,Sealing and Tensile adopt double pole combined, useful for products forming !
3,Advanced Air route design, Single ,double intake both ok ! Low pressure mechanical closing moulds , sealing, tensile, high pressure blowing bottles !
4,Microcomputer automatic controller, Simple and easy operation
5,Perform Bottles heating by infrared ray, Controlled constant pressure control , Frequency controlled , To achieve the best accuracy of blowing
6, Functional and Economical types of investment
7, Small Space , Structural stability
8, Simple Operation , one person can be ok !
9,Also can supply 3-5 gallon different sizes of perform bottles and caps
Parament and Configuration |
Theory Capacity | According to different of bottles | 80-100pcs/h
500-700pcs/h(5L) |
Max.Volume of bottles | According to number of cavity | 7L(two Cavity) 30L (one Cavity) |
Moulds | one or two cavity | 1or2 cavities |
Max.Diameter of bottles | 355MM |
Max.height | 453MM |
Moulds Area | 600*600MM |
Max.Thickness of Moulds | 390MM |
Stroke moulds | 350MM |
Max.Stretch Length | 500MM |
Closing Moulds | 320KN |
Power | Power | 220~380V,50~60Hz |
Heating Power | 27.8KW |
Working Pressure | 0.8Mpa |
Blowing Pressure | 3.0Mpa |
Size of Main machine | L*W*H | 2250*740*1900MM |
Size of Heating machine | L*W*H | 2440*620*1740MM |
weight of main machine | 1000Kg |
weight of heating machine | 400Kg |
auxiliary machine | Air compressor for high pressure | 1.2M3/3.0Mpa/15Kw |
Dryer machine | 1.0M3/3.0Mpa/375KW |
Air filter 2 | 1.0m3/3.0Mpa |
Some more pictures about our machine and its products
