Metal Cam Follower Bearing Track Roller Bearing McGill CF 2 1/4 CF2 1/4S CF2 1/4B NUTR 17A

McGill CF 2 1/4 CF2 1/4S CF2 1/4B NUTR 17A Cam Follower Track Roller Bearing

Description, 

1. The eccentric stud provides a way to adjust the radial position of the bearing, which can improve the load balance in the bearing combination application. The load balancing of the cam follower bearing can reduce premature damage due to bearing overload, thereby saving operating costs, reducing the requirements for precise mounting hole position tolerances, and providing the ability to readjust the bearing position as the raceway wears. The eccentric bushing is installed on the stud by press-fitting and is not hardened to keep the pin or set screw permanently locked.
2. The bushing type is also one of the MCGILL cam follower bearings. Non-metallic bushings support the load by sliding. For non-food-grade applications that are not convenient for relubrication or that do not allow grease contamination in the process, non-metallic bushings can reduce the bearing The need for lubrication. Its maximum allowable continuous operating temperature is 200 ° F. Bushed CAMROL bearings are used in a self-lubricating mode. However, continuous oil lubrication can be used to reduce wear rates. It should not be lubricated with grease.

Right front wheel bearing, Specification, 

Feature, 

The flange-type outer diameter (OD) of the cam follower can increase bearing life compared to standard cylindrical cam follower MCGILL bearings. Cams help distribute stress on the outer ring and rolling elements due to misassembly or stud bending. The cam also helps to reduce slippage of the outer ring in swivel or rotary applications. Not all applications take advantage of the flange outer diameter. Ask the application engineering department for guidance on your application.
Increasing the diameter of heavy-duty studs and the rod diameter of heavy-duty stud cam follower bearings increases the diameter of the studs, which can improve the static load carrying capacity of MCGILL bearings. Increasing the diameter can reduce the amount of deflection that can occur when the cam follower bearing is subjected to radial loads. Due to the increased load carrying capacity, the maximum recommended load can be 50% BDR. * On heavy-duty stud bearings, only for CFH inch series.
MCGILL bearings with hexagonal holes (reamed holes) are also available. The fixing force of the inner hexagonal holes is higher than the standard screwdriver slot, which is helpful for the installation and removal of stud cam follower bearings. Hexagonal characteristics are marked with "B" because it is produced by the reaming process. For sizes up to 3 ", bearing relubrication from the flange end must be considered.

If you need bearing quotation, welcome contact us.