The product introduction:
The manual swipe magnetic stripe reading terminal is a
high-reliability reading device for reading magnetic stripe
information in commercial fields such as banking systems,
commercial POS systems, attendance access control systems and
member management systems. With dual prompts of light and sound,
low power consumption, beautiful appearance and strong
compatibility, it can automatically identify magnetic cards of
different densities and standards. Suitable for a variety of system
environments, can be equipped with a variety of microcomputers,
terminals and POS machines. Multiple tracks (1st to 3rd tracks) can
be read simultaneously. The product is very simple and convenient
to connect to the PC system environment, no external power supply
is required. You can take power directly from the USB.The product physical map:
Technical parameter:Magnetic card standard | ISO7811/7812 | Product size | 140mm*43.5mm*41.5mm | Card thickness | 0.76 mm±0.08 mm | Card reading method | F2F | Card swipe speed | 10-150cm/sec (4-60inch/sec) | Recording density | TK1=210；TK2=75；TK3=210(BPI | Power supply voltage | USB interface power, DC5V ± 5% | Power supply fluctuation | 50mVp-p max | Current | 65mA(max) | Weight | RC4100≈190g; HRC4200≈100g | Head life | ≥500,000 times | Track width | 1.5mm | Operating position | indoor | Interface method | USB | Appearance | Indicator 1: Green LED, light indicates correct card reading | | 2: Red LED, light indicates card reading error |
Environmental needs:Working temperature | -20~50°C | Operating humidity | 20%～90% RH | Storage temperature | -30～70℃ | Storage humidity | 0%～95% RH |
How to use:Connect the USB to the USB interface of the PC, and swipe the
user's magnetic card or passbook along the identification direction
of the product to read the data on the magnetic card or passbook.Data Format:
After reading the magnetic stripe data successfully, it is sent to
the computer in the following format:SS | Magnetic card data | ES | CR | TK | % | DATA | ? | 0x0d | First track | ; | DATA | ? | 0x0d | Second track | + | DATA | ? | 0x0d | Third track |
The data format refers to the data of the first, second and third
rail magnetic cards transmitted from the device to the computer
after the card is swiped. The SET PROGRAM can be used to configure
the parameters to meet different application requirements.Parameter setting program:
The setup program integrates the model function of the USB keyboard
interface, and selects the 'keyboard' interface on the interface of
the program; 1. In the interface, “One Track”, “Two Tracks”, and “Three Tracks”
in front of ( ) means that the device will return the data on the
corresponding track on the magnetic card after the card is swiped.
Conversely, the device does not return data on the corresponding
track.
2. 'One track carriage return', 'two track carriage return', 'three
track carriage return' select ( ) on the interface, the device adds
a 0x0D (hexadecimal, carriage return) after the corresponding track
data (), on the contrary, does not add 0x0D after the corresponding
track data.
3. ‘Buzzer’ select ( ), the device will have a tone after the card
is swiped, the successful buzzer will sound, and the device will
sound three times. If you do not select it, the device will not
have an audible prompt after swiping the card.
4. ‘Suffixes’ selection ( ), the first track data prefix is ‘%’
suffix is ‘? ', the second track prefix ‘:’, suffix ‘? ', third
track prefix ‘+’, suffix ‘? ’. If not selected, the data returned
by the device will not have suffix data.
5. ‘Connect’ means to connect to the device via the ‘USB Keyboard
Port’ communication port. The ‘Settings’ button will not work until
the program is connected.
6. 'Settings' button, the computer will transfer the configured
parameters on the interface to the device. The device is stored
(with flash memory, you do not need to configure the parameters
once every time, it will be executed according to the last
configuration). Immediately follow the new rules.
Appearance diagram:
|
