Plastic Submersible Spa Pump 1.1KW 1.5HP 18m With Slipping Protection Sets

FQ-150 1.1KW 1.5HP 18m Swimming Pool Water Pump Spa Cover Pump Submersible Pump

Features:

· Life: lifetime more than 25,000 hours.

· Ceramic sleeve and ceramic shaft, Low noise.

· Can work with 80℃ fluids temperature.

· Working Way: 24 hours of continuous work.

· Slipping protection etc;

· FG signal.

· EMC compatibility test passed,no harassment signal .

· stall protection.

· PWM/Manual speed control function [optional].

· Can be customized./PV /5V /FG (Solar Panel driven/ 0～5V speed control / speed signal wire )

Working Conditions:

Medium temperature:5~50 C

Environment temperature:< 60 C2. Application :

FRE ESEA circulation&filtration pump canbe used for

aquaculture, water project, large sizeswimming pool,water park, etc.

1. Unscrew cap lid(turn counterclockwise).
2. Remove strainer basket and clean. Be sure all holes in basket are clear, flush basket with water. If basket is replaced backwards, cover will not fit on pre-filter body.
3. Clean and inspect lid Ring: re-install on cap cover.
4. Clean Ring groove on pre-filter body and Replace lid. To help keep lid from sticking, tighten hand tight only.
5. Prime pump (see priming instructions above)

A smart pump controller packed with great specifications and features that make it perfect. Everything is made easy where it automatically switches your pump on/off on open/closing of any tap. It comes with a LED screen showing the live RPM, current, voltage, etc. It provides stable performance, requires low maintenance and is long lasting; it is one of the few that will exceed your expectations. Buy one today and have the best and most reliable equipment at hand.

WITH A FULL RANGE OF SIZES, they are IDEAL FOR SMALL, MEDIUM and LARGE spas – Our pumps start from the 0.5 HP for circulation pumps up to the 3HP for spa jets and a full range of sizes in between. Connection fittings for standard PVC 2inch (48.5mm) pipe.

HOW TO USE – It is best to always replace your pump with a pump of similar size and power rating. Changing over and fitting of the pump can be done by the handy person but it is recommended to get it done by a professional. Suitable as a direct replacement OR upgrade to existing pump.