16.5m3 Big Flow Spa Water Pump Low Noise Operation Long Service Life

Pool And Spa Equipment Silent Operation Swimming Pool Water Pump Big Flow 16.5m3​​

Features:

· Life: lifetime more than 25,000 hours.

· Ceramic sleeve and ceramic shaft, Low noise.

· Can work with 80℃ fluids temperature.

· Working Way: 24 hours of continuous work.

· Slipping protection etc;

· FG signal.

· EMC compatibility test passed,no harassment signal .

· stall protection.

· PWM/Manual speed control function [optional].

· Can be customized./PV /5V /FG (Solar Panel driven/ 0～5V speed control / speed signal wire )

Paramerter:

Working Conditions:

M edium temperature:5~50 C

Environment temperature:< 60 C2. Application :

FRE ESEA circulation&filtration pump canbe used for

aquaculture, water project, large sizeswimming pool,water park, etc.

USE AND MAINTENANCE:

 
1. You should make the pump working in the standard rotate speed in use process, don't speed up at will, in order to avoid potential safety hazard and impact the useful life of the pump.

2. Direct coupled type pump units:the chassis must remain stable, so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially.Pump mounting height(in order to suction the water tank as the base)should be less than the permit smoking on 1-2meter high vacuum.

3. You should stop the engine if you discover abnormalities(such as noise, shock, hydraulic discharge descend etc.),and attention the bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in the pump, overhaul and oil, keep it in a dry and ventilate shade.
In winter, you should discharge the water at once when you stop using it in case frost crack.After the pump every 1000 hours operating time, you should take down and clean the bearing, and exchange quick-wear parts.

INSTALLATION AND APPLICATION:

These pumps are suitable for handing clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. reliable, compact, economic and simple to use, They are particular suitable for domestic and swimming pool applications such as water supply for recirculation in air conditioners and refrigerators, industrial water uses in general, and the automatic distribution of water from surge tanks, watering gardens, lifting water from tanks or wells down to 9m depth.

These pumps should be installed in a covered area, protected against the weather.