Metal Bracketed Mist Eliminator Knitted Wire Mesh Pad Demister

1. Metal Bracketed Mist Eliminator Knitted Wire Mesh Pad Demister

Mist eliminators consist essentially of pads of multiple layers of fabric-knitted from metals and synthetic fiber monofilament chosen to suit the particular duty requirements. After knitting each layer is crimped and then converted into desired size or shape or pads. The pads are not entirely rigid and generally supported by open grid structure.

2. Mesh Pad Demister Reference Data Sheet

.

3. Mesh Pad Demister Features,

factory has been making Monel wire mesh demister for over 10 years.  We know the demister deeply and can help design your suitable demister / mist eliminator according to your operating data.

Some features of made Monel demister pad.

1. Reduce pollution. Improve process efficiency by reducing product carryover in chemical plants thus saving the planet, on droplet at a time.

2. Flexible. Made to any size or shape and with the material and wire diameters that you require.

3. Specialist support. Specialist support throughout the design and development processes.

4. Mesh Pad Demister Gas Celocity Calculation:

5. Mesh Pad Demister Application,

• Reduce loss of valuable chemicals: demister pads markedly cut glycol, amine, or solvent consumption in absorption and regeneration towers.
• Increase throughput capacity: demister pads allow a significant increase in throughput anywhere gases and liquids come into contact in process equipment.
• Improve product purity: demister pads prevent contamination of side draws and overheads in refinery atmospheric and vacuum towers and other distillation columns.
• Minimize contamination: demister pads can prevent the poisoning of expensive downstream catalysts or provide boiler feed water quality condensate from evaporator overheads.
• Provide equipment protection: demister pads protect turbine, blower, and compressor blades, which can eliminate serious maintenance problems.
• Reduce air pollution: demister pads help diminish droplet emissions to environmentally acceptable levels.

• Demister mesh density and its applications

  Mesh density (stainless steel)	Application
  50 kg/m3	Heavy fouling, e.g. evaporators
  80 kg/m3	Moderate fouling, e.g. vessel boilers
  110 kg/m3	Light fouling
  145 kg/m3	Heavy duty, e.g. oil and gas separators
  170 kg/m3	General purpose, not totally clean
  195 kg/m3	Optimum efficiency & pressure drop
  240 kg/m3	High density with high separation efficiency
  112 kg/m3	General purpose, clean service
  145 kg/m3	Find droplet removal in clean service

Common Applications

Knockout Drums; Evaporators; Steam Drums; Distillation Towers; Scrubbers; Refineries; Petrochemical Plants; Flue Gas Desulfurization; Gas Absorption Systems; Sulfuric Acid Plants.