125Y High Flow Capacity Structured Packing 304 Metal Sheet

125Y high flow capacity structured packing 304 metal sheet

1. 125Y metal sheet strucutred packing

The most common material used for  structured column packing is SS 304 and SS 316L. However  manufactures this solely based on our customers’ requirements and can also be made from other materials based on special requests.

2.  structured packing products list (part):

3.  125Y metal sheet structured packing uses the industry standard corrugated perforated and embossed sheet metal design to provide efficient vapour-liquid contact. The style of the embossed surface has been optimised to provide maximum wetability and numerous perforations enhance cross mixing of the process fluids. Type Y has a crimp angle of 45° and type X 30°. Suitable liquid irrigation range from below 0.5 up to 200 m3/m2.hr.

4. Benifits of  125Y metal sheet structured packing:

Lower pressure drop through the column

■Lower botoms temperature for heat sensitive systems

■Higher relative volatility for difficult separations

■Lower energy consumption

■Reduced foaming tendency

Higher efficiency in the same tower height

■Large number of theoretical stages required

■Reduced reflux requirement

Higher capacity

■Reduced vessel diameter

■Increased operating rates

Excellent liquid spreading characteristics

■Improved efficiency

■Offshore applications subject to permanent tilt and motion

Reduced liquid hold-up

■Smaller amounts of polymer inhibitor

5. 125Y metal sheet structured packing shipped to the port.

6. Surface Treatments of 125Y Metal Sheet Structured Packing

It is important to achieve good contact between the liquid and vapor phases. A packing that spreads the liquid evenly in a thin film will exhibit beter performance. Mixing the film creates turbulence that enhances the mass transfer.

Modifications to the texturing of the packing surface improve the liquid spreading which, in turn, leads to enhanced packing efficiency.

All types of  structured packings are available in a variety of corrugation sizes. This provides the versatility needed to optimize a packing configuration to best meet the efficiency, capacity, and pressure drop requirements for a particular application. 

Welcome your inquiry about  structured packing any time!