PP Vane Pack Mist Eliminator Length 2465mm Height 200 Mm With Hooks

                                             PP mist eliminator vane pack mist eliminator length 2465mm,height 200 mm with hooks

Vane Type Mist Eliminator is usually used in dirty or blocking operating condition.
It can remove above 5 μm entrainment with low pressure drop.

The mist eliminator is mainly composed of corrugated blades, plates, card strips and other fixing devices. In the wet desulfurization process, the absorption tower is prone to produce "fog" with a particle size of 10-60 microns during the operation, and the "fog" is not only Containing moisture, it also dissolves sulfuric acid, sulfate, SO2, etc., and also causes fouling and severe corrosion of fans, heat exchangers and flue. Therefore, the wet desulfurization process requires defogging on the absorption equipment and is purified. The gas is demisted before leaving the absorption tower