2 Pass Chevron Plate Vane Pack Demister 200mm Thickness With Drains

2 Pass Chevron Plate Vane Pack Demister 200mm Thickness With Drains

In Hualai factory, we are always trying to understand our customer's requirements and so better satisfiy them. In this case, it is a new-designed chevron plate mist eliminator in stainless steel 316L material. For easier handling and installation in the working place, a metal plate bracket is added. The point is on both top and bottom sides, some regular drain holes are perforated. They can either be used to fasten the mist eliminator or to drain the liquid droplet captured. Also the mist eliminator can assure a good performance either installed upward or downward.

Some details of this creative chevron plate mist eliminator:

The chevron plate demister is widely used to separate entrained liquid droplets from gas stream, in which the liquid droplets are 8 μm or larger. When the gas stream passes through the vane pack demister and change direction, the liquid droplets are unable to change direction as quick as the gas due to their momentum. So the liquid droplets impact on the chevron blade and then coalesce and form large droplets until drain away.

In the special environment, where there is some small solid particles, vane pack mist eliminator is the better choice for liquid and gas separator than the wire mesh demister.

Advantages of vane pack demister / mist eliminator

1. Lower pressure drop.

2. Resistance to fouling.

3. High tensile strength.

4. Durable and long service life.

5. Custom-made design available.

6. High filtering and separating efficiency.

7. High capacity. It has 30% to 100% more capacity than the wire mesh mist eliminator.

Here is a side view of the chevron plate demiser showing the drain holes.

Welcome your inquiry anytime! Don't hesitate to contact us with any questions!