55khz Temperature controled Ultrasonic solder Iron equipment
Ultrasonic tining
Introduction:
Ultrasonic soldering is a specialized soldering process that
eliminates the need for chemical flux. In place of flux, it uses
acoustic energy to disrupt oxides that form on molten solder and
base metal surfaces during the joining process. Many times
ultrasonic soldering is used to join difficult-to-wet materials
like aluminum, titanium, glass, ceramics and dissimilar materials.
Applications include electronics, medical decives, and structural
components, in various base metal combinations, such as copper,
aluminum, and titanium, graphite, carbides and more.
There are several advantages to ultrasonic soldering... It is a
fluxless process, utiizing acoustically driven mechanical engery to
fracture and disrupt oxide films on solder and base materials to
promote solder wetting and and adherence. Flux can contaminate and
damage/corrode senstive materias, so fluxless soldering is
advantageous. Ultrasonic soldering can also be very useful in
senstive base materials, since the soldering iron tips only need be
immersed in the molten solder pool for the mechanical activation to
work.
Parameter:
| Model No. | HC-SI60 |
| Ultrasonic Frequency | 60Khz |
| Maximum Output | 100 Watt |
| Temperature Range | 150 ~ 400 °C |
| Power Supply | 220V / 50-60 Hz |
| Ultrasonic Generator | Size | 250(W) x 310(L) x 135(H) mm |
| Weight | 5 Kg |
| Feature | Ultrasonic Amplitude Adjustable |
| Iron Handle Length & Diameter | 190mm / Ø20 |
| Avail Soldering Matrial | ITO Glass, AL, Mo, Cu etc., |
No need of flux when soldering to the glass, ceramic, or metal (the
end of iron tip makes ultrasonic vibration, and removes any
contaminants or oxide layers on the surfaces)
It can solder to the glass, ceramic, or metal that cannot soldering
Light weight and good portability
Various derivatives are available
According to the customer’s order, the end of the tip in the handle
can produce
It is for electrode part, solar battery parts, and electrode of
superconductivity ceramic parts
Characteristics
User-friendly interface
By combining Greatcell Solar ultrasonic solderer with peculiar
solderer alloys, the customer can solder directly on
glass/ceramics/unsolderable materials.
New feed-back method developed from careful research of oscillator
frequency settings enables stable, reliable work.
Output adjustable by stepless control
Application:
Small scale production.
For use in laboratory conditions, while preparing data before mass
production and for inspection purposes.
Soldering electrodes for display goods.
Soldering electrodes for solar cells.
Soldering electrodes on highly conductive
ceramic substrates.Bonding electronic parts.
-
Temperature can be set within 200°C 500°C by 10°C unit
