IOS Flour Meal 8mm Fertilizer Granulator Machine

Customized 3-8mm Roller Granulator Compound Fertilizer Extrusion Granulation Equipment

Introduction 

The roller extrusion granulator is a new generation of granulation equipment developed by our company. It is produced by non-drying room temperature technology, one-time molding, and the output is 1-1.5 tons/hour and 1.5-3 tons/hour. The equipment has low investment and good economic benefits. The complete set of equipment has a compact layout, scientific and reasonable, and advanced technology. Energy saving and consumption reduction, no three wastes are discharged, stable operation, reliable operation and convenient maintenance. The raw materials have wide adaptability and are suitable for the granulation of various raw materials such as compound fertilizers, medicines, chemicals, feeds, etc., and the product granulation rate is high. It can produce compound fertilizers of various concentrations and types (including organic fertilizer, inorganic fertilizer, biological fertilizer, magnetic fertilizer, etc.).

working principle:

This series of roller granulation is an extrusion sliding model. Its working principle is: the belt and pulley are driven by the motor, transmitted to the driving shaft through the reducer, and synchronized with the driven shaft through the split gear, and work in opposite directions. The material is added from the hopper, formed by the pair of rollers, demoulded and pelletized, and sent to the crushing screen studio through a pair of chains, where the finished product particles (balls) are screened and separated, and then the returned material is mixed with the new material. Then granulate. With the continuous rotation of the motor and the continuous entry of materials, mass production can be realized.

Overview of the structure of the roller extrusion granulator
The whole machine is divided into four parts:
1. Frame part: all working bodies of the machine are installed and fixed on the frame. The frame of the machine is made of medium carbon steel plate and channel steel. It has passed strict quality control and specific process requirements to achieve the purpose of the machine. There are lifting holes in the middle of the four corners of the frame to facilitate Used in loading and unloading transportation.
2. Transmission connection part: the motor drives the pulley, V-belt, and reducer to drive to make the machine head work. In addition, sprocket and chain form a transmission chain which is transmitted to the crushing and separating work part. Among them, the transmission reducer and the working part of the machine head are engaged and driven by a nylon pin coupling.

parameter