Temporary Chain Link fencing systems can quickly and easily be
installed, without the need to disturb the surface area by digging
holes or laying foundations. The main chain-link fence panel is made with chain fence panel tied with patch after hot-dip
galvanizing. The chain link fencing has the features of uniform
mesh, flat surface, weaving easily, long-time use and high
practicality. The post is tied with fence panel and it can be quickly and easily
installed. Its feet can be applied with galvanized iron tube which is welded into a
rectangular.
Chain link fence panel size: 2400 mm (L) × 2100 mm (H).
Mesh: 40 mm - 60 mm.
Wire diameter: 2.5 mm - 5 mm.
Galvanized tube: 32 mm.
Finish treatment: Hot dipped galvanized, plastic coated. In
general, the hot-dip galvanizing is widely used.
Galvanized steel framework and galvanized steel fabric wire mesh
(50× 50), diameter 4 mm.
Top rail, bottom tension wire, and three strands of barbed wire
mounted on 45 degree extension arms.
The upper strand will be approximately 300 mm out from the fence
and 300mm above the top of the fabric.
The total height of the fence including the barbed wire arms will
be 2.4 m.
Mesh | 1" | 1.5" | 2" | 2-1/4" | 2-3/8" | 2-1/2" | 2-5/8" | 3" | 4" |
25mm | 40mm | 50mm | 57mm | 60mm | 64mm | 67mm | 75mm | 100mm |
Wire Diameter | 1.2 - 5.0mm |
Length of The Roll | 1.0m - 100m(or more) |
Width of The Roll | 0.5m - 5.0m |
Materials and Specifications Can Be Made As Your Requirements |