Drilling Wall Hung Bathroom Basins Stain Resistance / Hanging Wash Basin

Basin

1. Solid Surface Basins is also made from same raw material as Solid Surface Sinks.Solid Surface Basin is also made from resin, ATH, pigment and auxiliary agent. Theextraordinary versatility of Solid Surface Basins makes it the advisable choice for bathrooms.

2. Solid Surface Basins combine beauty, functionality, durable through yearsof use and stain resistance with easy to care for, and the abundant design that makeSolid Surface Basin all difference.

Wall Hung Basin Installation Instruction

1. Drill Some Holes In The Required Position On The Wall Using A 14mm Masonry Drill Bit To A Depth Of 75mm

2. Push A Wall Plug Into Each Hole

3. Screw A Fixing Bolt Into Each Fixing Plug Using A 8mm Spanner Until Spanner Contacts The Wall

4. Place The Basin In Position Against The Wall ,Locating The Fixing Bolts Through The Holes In The Rear Of The Basin.Push A Plastic Washer,Followed By A Metal Washer,Onto Each Fixing Bolt

5. Screw A Metal Nut Onto Each Fixing Bolt To Secure The Basin.Caution:Do Not Over Tighten As This May Damage The Materials.

Note:These Fixings Are Suitable For Solid Walls Only.Plasterboard Or Stud Walls May Require Specialist Fixings(Not Supplied).

Caution :Care Should Be Taken When Drilling Walls And Floors Avoid Any Wires Or Pipes.

Tag:

Wall Mount Sink

Hanging Wash Basin