Natural Gas CHP 35KW CE Certified With Higher Overall Efficiency
Lower Noise
Different Configurations For Different Application
-Standalone off-grid operation or Synchronize to grid
-With or Without ATS
-With or Without soundproof canopy
-With or Without catalyst converter to reach emissions limit
-Single unit or several units in parallel
-Remote control
Main Specifications
- The monitor and display on the voltage, current, frequency,
active power, apparent power, power factor of the generated
electricity / grid electricity.
- The monitor and display on the CHP water temperature, oil
pressure, rotational speed, battery voltage, running hours,
accumulative total power and number of starts.
- Protection alarm and fault automatic storage on high water
temperature, low oil pressure, double speeding, over current, over
voltage, over frequency and phase failure etc.
| | Model | SP35N |
|
| fuel | — | Natural Gas |
| marks | — | Synchro CHP |
| electrical output(KWe) | kVA/kWe | Continuous Power |
| 44/35 |
| thermal output(KWt) | kWt | 56 |
| electrical efficiency | % | 32.7% |
| thermal efficiency | % | 51.4% |
| overall efficiency | % | 84.1% |
| frequency | Hz | 50 |
| voltage | V | 400/230 |
| gas inlet pressure | kPa | 3-5 |
| dimension (soundproof type) | mm*mm*mm | 2100*1200*1500 |
| net weight | kgs | 1100 |
| NG consumption | m3/kW.h | 0.31 |
| standard type-db(A)@7m | — | 58 |
| Certificate | — | CE |
| water-water heat exchanger | — | SWEP |
| water-exhaust heat exchanger | — | designed by our own factory/made of full stainless steel |
| ignition system | — | Impco |
| speed governor | — | Woodward |
| mixer | — | Venturi type |
| gas filter | — | Madas |
| zero regulator | — | Kromschroeder |
| solenoid valve | — | Kromschroeder |
| gas pressure gauge | — | Dungs |
| Lambda auto control | — | Available on request with extral cost |
| catalyst converter | — | Available on request with extral cost |
| MCB | — | ABB |
| GCB | — | ABB |
| Controller | | ComAp |
| Engine model | — | SP-4BTA |
| Engine type | — | 4 cylinders,4stroke,water-coolled |
| RPM | — | 1500 |
| Compression Ratio | — | 10.5 |
| Displacement | — | 3.9L |
| Oil capacity | — | 9.5L |
| Charging voltage | — | 24V(DC) |
| Charging current | — | 5A(DC) |
| Starting system | — | Electic-start |
| Alternator model | — | Meccalte |
| phase | — | 3 phase 4 wires |
| insulation system | — | class H |
| protection | — | IP23 |
| Cooling Type | — | air cooled |
Scope Of Application
For more information about the 35kw CHP, please consult with your
sales representative.Thanks.
Our Packing
Our Hannover Exhibition
Our Showroom In Germany
Our Customers' Visiting
